Kverneland Satio
Effektiv og omkostningseffektiv såning - med fleksibilitet klar til fremtiden
Kompakt såmaskine til solodrift med små og mellemstore traktorer
Højdepunkter
- Compact and lightweight design for low power requirement
- Flexible - sowing independently from seedbed preparation
- Precise seed placement
- Cost-efficient
- High sowing speeds
Beskrivelse
Kverneland Satio er en kompakt solosåmaskine og er den ideelle maskine til små og mellemstore landbrug. Som en traktormonteret solosåmaskine kombinerer Satio et kompakt letvægtsdesign med den gennemprøvede Kverneland-kvalitet. Det tætte tyngdepunkt sikrer et minimalt effektbehov på op til 54 kW og giver mulighed for højere arbejdshastigheder. I solodrift giver Kverneland Satio ekstra fleksibilitet til også at tilpasse sig ekstreme vejrforhold.
Den stive Satio såmaskine fås med en arbejdsbredde på 3,0 og 4,0 meter. Hjulene på Satio kan nemt justeres til enhver sporvidde. Det sikrer en konstant jordkontakt, der driver den mekaniske doseringsenhed på Satio. Integrerede sporudjævnere er standard. CX-II-skærene med eller uden pressehjul er fastspændt til såbjælken og gør det muligt at vælge den rigtige rækkeafstand på 12,5 cm eller 25 cm for at tilpasse dem til individuelle landbrugssystemer. Skærtrykket justeres mekanisk.
Den pneumatiske solosåmaskine Satio har en beholderkapacitet på 750 liter, 1000 liter med forlænger. Til elektronisk styring fås FGS og Signus som ekstraudstyr.
Funktioner
- The central, totally enclosed cell wheel of the metering device accurately measures the required volume of seed and discharges it into the venturi cone where it is mixed with the air stream and then conveyed through the diffuser tube and the seed delivery hoses to the coulters.
- The distribution head is mounted in a protected position inside the seed hopper.
- The central metering device accurately metres any desired volume of seed from 2kg per hectare to 380kg per hectare
- Differences in metering accuracy are +/- 1% for diagonal and length wise inclination (F.A.T. CH (University of Switzerland))
- Only 1 metering device is needed for up to 32 coulters
- For the sowing of fine seeds, e.g. rape or grass, the metering device can be infinitely adjusted to fine seed/micro-metering by means of a spindle, without any need for tools.
- The metering system is mechanically driven via the landwheel running in the tractor track to always have grip.
- The CX-II disc coulter from Kverneland not only guarantees smoother running but also exact seed placement.
- The flatter cutting angle of only 5.4° of the steel disc requires less pulling power to reach a constant seeding depth of up to 6cm.
- Due to the combination of the steel disc with a diameter of 325mm and the flexible plastic disc, there is no need for independent scrapers, saving the cost for expensive wearing parts. In addition the coulter is completely maintenance-free!
- Up to 50kg coulter pressure can be achieved by a pre-loaded spring. Safe operation is ensured when working with high working speeds and high quantities of plant residues on the soil surface.
- An inter-row coulter spacing of 445mm for maximum clearance and the following press wheel (standard equipment) ensure an optimum seed/soil contact in all conditions.
- The press wheels can be set in fixed, floating of lifted position in order to be able to adapt quickly to changing weather, soil or working conditions.
- The CX-II coulter is also available as light edition without press wheel which reduces the weight and length of the coulterbar. This will allow to operate the seeding combination also with lower lifting capacity of the tractor.
- The drill can be ordered with two different row spacings of 12.5cm or 25.0cm according to individual farming systems.
- The CX II coulters are clamped in staggered position over 2 rows by short and longer brackets.
- More clearance means different seed density and micro climate in the crop.
Choice of sowing distance
Sowing distance 12.5cm
- Best distribution for high seed rates
- Rows close quickly
- Reduced weed pressure
- Efficient use of nutrients, water and sun
Sowing distance 25cm
- Optimised micro climate reduces fungal infestation
- Less seeds needed per m² with new type of seeds (hybrid)
- Saving on water resources
- Reduced pulling force requested
- Better clearance in wet conditions
Teknisk specifikation
Teknisk specifikation
Download brochure| Type maskine | Satio 1030 | Satio 1040 | |
|---|---|---|---|
| Ramme | Bugseret | Bugseret | |
| Arbejdsbredde (m) | 3.0 | 4.0 | |
| Transportbredde (m) | 3.0 | 4.0 | |
| Beholderkapacitet (l) | 750 | 750 | |
| Beholderudvidelser - ekstraudstyr (l) | 250 | 250 | |
| Skakt til hurtig tømning | Standard | Standard | |
| Sensor til lavt niveau | Standard | Standard | |
| Kobling top | CAT II / CAT III | KAT II / KAT III | |
| Kobling lav | KAT II / KAT III N / KAT III | KAT II / KAT III N / KAT III | |
| Hjul type | 26x12.00 | 26x12.00 | |
| Drev 1000 o/min | Standard | Standard | |
| Drev 540 o/min | Ekstraudstyr | Ekstraudstyr | |
| Hydraulisk ventilatordrev | Ekstraudstyr | Mulighed | |
| Mekanisk doseringsenhed (nr.) | Standard (1) | Standard (1) | |
| Mikro-måling | Standard (1) | Standard (1) | |
| FGS - Sporvognssystem | Mulighed | Tilvalg | |
| Signus - Sporvognssystem | Mulighed | Mulighed | |
| Kontrol af måleenhed | Mulighed | Mulighed | |
| Justering af udsædsmængde | Mulighed | Mulighed | |
| Udsædsmængde (min. - maks.) | 2 - 380 kg/ha | 2 - 380 kg/ha | |
| Afspærringsventiler til kørespor | Mulighed | Mulighed | |
| Mekanisk halvbreddeafspærring | Mulighed | Mulighed | |
| Markør før fremspiring | Mulighed | Mulighed | |
| Antal såskær 12,5 cm afstand (antal) | Standard (24) | Standard (32) | |
| Antal skår 25 cm afstand (antal) | Standard (12) | Standard (16) | |
| CX-II-skær inkl. pressehjul | Standard (16) | Standard (16) | |
| CX-II-skær med speciel skiveform uden pressehjul | Mulighed | Ekstraudstyr | |
| CX-II-skærskive Ø (mm) | 325 | 325 | |
| Pressehjul Ø (mm) | 250 x 42 | 250 x 42 | |
| Såskærstryk CX-II skiveskær (kg) | 5 - 50 | 5 - 50 | |
| Mekanisk justering af skærtryk med håndsving | Standard | Standard | |
| Efterharve med S-tænder (10 mm) | Mulighed | Ekstraudstyr | |
| Sporudrydder | Standard | Standard | |
| Værktøjskasse og kalibreringssæt | Mulighed | Ekstraudstyr | |
| Hydr. sammenklappelig spormarkør med tandskive | Mulighed | Mulighed | |
| Ladetrin/platform | Mulighed | Mulighed | |
| Sæt til vejbelysning | Ekstraudstyr | Ekstraudstyr | |
| Oliepåfyldning hydr. ventilator 4400 U/min (l/min) | 30 | 30 | |
| Min. effektbehov (HP/kW) | 73/54 | 98/72 | |
| Vægt (kg) med såskær | 780 - 1260 | 880 - 1450 |
Teknisk specifikation
Teknisk specifikation
Download brochureModel |
Satio 1030 |
Satio 1040 |
Frame |
mounted |
mounted |
Working/transport width (m) |
3.0 |
4.0 |
Hopper capacity (l) |
750 |
750 |
Hopper extensions - option (l) |
250 |
250 |
Mechanic metering device (N°) |
Standard (1) |
Standard (1) |
Micro metering |
Standard |
Standard |
Seed quantity (min. - max.) |
2 - 380kg/ha |
2 - 380kg/ha |
No. of coulters at 12.5cm distance (N°) |
24 |
32 |
No. of coulters at 25.0cm distance (N°) |
12 |
16 |
Min. power requirement (HP/kW) |
73/54 |
98/72 |
Weight (kg) with coulters |
780 - 1260 |
880 - 1450 |