Kverneland iXtrack T4
Alle afgrøder fortjener den bedste pleje.
iXtrack T4 er en bugseret sprøjte med høj præcision fra Kverneland. iXtrack T4 er udviklet i samarbejde med landmænd og designet til præcis, nem og omkostningseffektiv sprøjtning.
Højdepunkter
iXspray for en brugervenlig betjening Boom Guide: automatisk styringssystem for bomhøjde iXclean Pro fuldautomatisk ventilstyringssystem Plug and play med IsoMatch Tellus GO+ eller PRO Tilslut din maskine med IsoMatch FarmCentreBeskrivelse
iXtrack T4 har en nominel tankvolumen på 3400 op til 4600 liter. Bomme i stål og aluminium fås fra 18 til 40 meter. Den enkelte centrale ramme i kombination med de specialformede parallelogramarme skaber plads til høje dæk og tillader en maksimal styrevinkel på 32 grader. Det sikrer maksimale styremuligheder med en snæver venderadius, selv på 1,50 m spor. iXtrack T4 har en ophængt trækstang, hjulaksel og parallelogram. Den er ikke kun ophængt i arbejdsstilling, men også helt ophængt under transport, hvilket forbedrer køreegenskaberne og stabiliteten under alle forhold. Den innovative iXspray-software med intuitiv touch-interface garanterer brugervenlig betjening. iXtrack T4 Essential-modellerne er baseret på de vigtigste specifikationer, som en bugseret sprøjte skal have i dag!
Højdepunkter
- Styrevinkel på 32 grader
- Styrevinklen på 32 grader og venderadiusen på 3,6 m gør iXtrack T4 meget fleksibel og solid.
- iXspray betyder en intuitiv brugergrænseflade og brugervenlig betjening, der sikrer, at sprøjtningen foregår på den nemmeste og mest effektive måde.
- Det glatte, ophængte parallelogram kombinerer optimal stabilitet med blød bomafbalancering og begrænset lodret bevægelse for at minimere afvigelser i sprøjtehøjden.
- Nemt plug and play med IsoMatch Tellus GO+ eller PRO eller enhver anden AEF-certificeret terminal.
- Placeringen af tanke, slanger, ventiler og afløb er optimeret for at minimere restvæske.
- IsoMatch FarmCentre kan anvendes til Kvernelands ISOBUS-maskiner - og forbinder redskaber og terminaler i en kontinuerlig strøm af data og tilslutningsmuligheder.
Funktioner
Easy hitching
The drawbar for the iXtrack T3 and T4 is easy to change from top to low linkage or the other way around, depending on the linkage point of the tractor.
Maximum Steering Possibilities
The iXtrack T series offers maximum user friendliness and comfort by having a steering axle which contributes to excellent stability in different field conditions. The track width can be changed from 1.50m to 2.25 metres. This ensures maximum steering possibilities with a tight turning radius.
Smooth and Suspended
The iXtrack T series is equipped with a smooth, suspended parallogram that is active when in the field and in transport. The parallelogram combines optimal stability with soft boom balancing and limited vertical movement to minimise spray height deviations, securing correct crop coverage.
ErgoDrive Headland Management System
ErgoDrive headland management is standard equipment for the iXtrack T series. ErgoDrive assists the operator on the headland turns. It is activated by simply switching ON or OFF and ErgoDrive controls all the necessary actions, while the operator can focus on driving safely.
Turning radius
The single central frame, in combination with the special shaped parallelogram arms, create room for high tyres and allow a maximum steering angle. This ensures maximum steering possibilities with a tight turning radius, even on 1.50m track.
Watch here the video about the turning radius. Be aware of the following features and benefits:
- Track width 1.50 – 2.25m
- Track width in steps of 5 centimetre
- Space for 1.90m high tyres
- 3.60m turning radius
- 32 degree steering angle
- Track following
- Turning mudguards
iXclean
ENFO priming and rinsing is standard on all Kverneland spray computers. Before spraying starts the spray lines are filled with chemicals exactly up to the nozzle by automatic shut off. After finishing or interruption, crop protection agents are automatically flushed out of the spray lines with a minimum of clean water consumption. This ENFO technology optimizes filling and cleaning of the spray lines. Accurate application, no waste of products and saving water are the benefit for the environment.
iXclean Comfort
iXclean Comfort is a semi-automatic valve control system. The combination of an electrical level indicator and suction valve provides operator comfort and accuracy; automatic filling stops when the programmed level is reached, and remote control of all ENFO rinising and priming functions are carried out from the cab! Simple prime the spray lines before you start and rinse them afterwards.
iXclean Pro
iXclean Pro is an advanced solution with fully automatic, electric valve management. It means all functions can be controlled from the cab. Switching between filling, agitation, spraying, diluting, priming, rinsing and tank cleaning, is extremely easy: just push the button! In addition iXclean Pro offers also a fully automatic multi-step rinsing and cleaning program with triple dilution for the entire sprayer. Pushing one button a comprehensive cleaning process including all lines will start. It is so thorough, that residue levels after automated cleaning are below 1%.
iXflow-E
iXflow-E is the high pressure recirculation system with electric nozzle control. There is a free circulation of chemicals with a return of spray liquid back to the tank as spraying stops. This means there is no sedimentation in the spray lines and no dead ends for spraying or cleaning, even when the boom is in vertical position. During spraying each section gets under pressure from both ends of the spray lines, so the operator can immediately start spraying without any pressure drop. It is easy for the operator to program the number and size of sections which fits the best to their requirements and field situations.
The HSS spray boom combines a minimum of weight with maximum strength and stability. Special hardened Domex steel gives the spray boom a long lasting heavy duty high quality reputation. The aluminium bonding instead of welding of the HSA spray boom range provides a weight saving and gives remarkable strength.
HSA Spray Boom
The HSA aluminium spray boom offers efficient protection of the nozzle holders within the bottom profile. This profile is designed for easy cleaning and much more. With no sharp angles, no liquid and residues can be trapped. The anodised surface protects against corrosion and scratches.
HSS Spray Boom
The HSS spray boom is designed for professional use. The triangular construction provides perfect integration of the stainless steel spray lines, nozzles and nozzle holders and the optimal hose routing where all is well protected. Working widths from 18 up to 40 metres with a variation in different section lengths offer the sprayer adapted to customer demands!
HC Spray Boom
The HC boom is the multi-talented boom in the steel boom range. The triangular steel construction and the unique anti yaw system allow high speed even in very difficult conditions. The HC boom is giving you more flexibility with functionalities for one side folding, symmetrical reduction and asymmetrical reduction depending of the choice for the electric hydraulic command. The special designed locking system allows to keep parallelogram suspended during transport.
Compact and Stable
In transport position the HSA and HSS spray boom fold away nicely over the patented tank design and far away from the tractor cab. This results in a transport width of 2.55m and a height below 4m that together with the low gravity point provides excellent stability on the road, as well in the field.
Boom Guide
Boom Guide is an automatic boom height control system that helps the operator to maintain your chosen spraying height. Ultrasonic sensors control the sprayer’s hydraulics to guide the boom.
Sensors with Hybrid Mode as standard
This unique sensor technology, provides excellent guidance in many different and challenging field conditions and crops. The hybrid mode not only measures the distance to the plant (upper growth), it also measures the distance to the ground or bottom parts of growth at the same time. There are three different modes:
- Soil mode: the sensors only see the bottom. The soil remains representative.
- Crop mode: the sensors only see the crop (top).
- Hybrid mode: the sensors follow the soil surface and the crop. When the crop is uneven, a uniform crop is virtually determined. Used in unclosed or uneven crops.
The advantage is a perfect boom guidance at higher speed and a total respect of the optimal nozzle distance to the crop, which result in highest efficiency of the application and reducing drift to a minimum level
Boom Guide Comfort
The two ultrasonic sensors on the boom can control the spray height via the central slope correction and boom lift functions. The cost-effective system is suited to gentle slopes, uneven crop conditions and lower driving speeds.
Boom Guide Pro
This advanced system uses three ultrasonic sensors to control left- an right-hand boom sections independently for the ultimatic guidance in the most challenging field conditions. It can deliver positive and negative lateral movement on each side of the boom to follow the contours in every situation!
Boom Guide ProActive
The system proactively reacts on boom movement and controls both the central and independent slope correction, as well as boom lift functions to guide the boom over the crop canopy, soil surface or a combination of both modes.
Boom Guide 5 Sensor Extension
The Boom Guide 5 sensor extension provides two additional ultrasonic sensors to ensure proper height measurements with booms reduced to 24 metres.
Storage Locker
A storage locker is integrated on the left hand side behind the door allowing you to keep your safety and cleaning equipment or tools with you on the sprayer. An additional storage locker is available for the right hand side to create even more storage place.
Easy Accessible Filters
The transparant filter bowl provides direct view on the dirt degree of the suction filter without dismounting. A valve at the bottom allows emptying the filter content before removing the bowl to avoid contamination of the hands with chemicals. The self cleaning pressure filter prevents blocking via a continuous flow keeping the filter mesh clean. The undissolved particles are returned into the tank until they are completely dispersed.
Chemical Inductor
The chemical inductor is an integrated part of the tank design. It is located next to the valve panel for easy access. Equipped with a circular rinsing system and waterproof cover, it can be rinsed safely with closed cover. Big quantities of powder and difficult mixtures are injected without any problems within seconds!
Clean Water Tank
The clean water tank is equipped with a level indicator. It can be filled via the opening on the clean water tank. It contains sufficient clean water for thorough cleaning with the several iXclean functions.
Filling via the Suction hose
External aspirate water is filtered first by the filter on the hose and then by the suction filter. In parallel you can already use the chemical inductor to add and premix chemicals.
Hand Wash Tap
You can wash your hands via the hand wash tap which is centrally located on the valve panel.
External Washing
A cleaning kit with a 15 metre hose and a brush, can be connected to the pressure side of the pump. It is allowing precleaning of the sprayer in the field, using water from the clean water tank.
Dual Agitation System
The return flow agitation system keeps the mixture homogeneous during operation and can be easily switched off in case of foam risk or nearly empty tank. The powerful high pressure agitation with injector nozzles guarantees powerful mixing which can activate after filling or a long break.
The iXtrack T series are 100% ISOBUS compatible as standard, which means easy plug and play with the IsoMatch Tellus GO+ or PRO or any other AEF certified terminal. The innovative iXspray hardware and software with intuitive touch interface guarantees an user friendly operation of the sprayer. iXspray is full of nice features to make the operators life easy, save time and avoid mistakes in a busy working season, for example pre-sets for spray jobs and boom configuration can be configured easily.
IsoMatch Grip
The IsoMatch Grip adds control to your fingertips for easy control of the sprayer. From 1 up to 44 functions over 4 modes can be programmed freely by the operator. So you can start with basic functionalities and add other functionalities later on demand. Due to the ISOBUS AUX-N functionality the IsoMatch Grip can also be used to control other implements.
IsoMatch GEOCONTROL
The combination of IsoMatch GEOCONTROL and GPS allows the operator to reduce overlap and over dosing, to increase crop quality and save costs. All this in combination with even high flow rates, because there is no impact on the section length, no loss of pressure or an unequal flow between sections. IsoMatch GEOCONTROL application fulfils the need in terms of easy, smart and efficient farming, by providing the use of automatic section control and variable rate applications.
Next to the iXtrack T4, there is a model which is called iXtrack T4 Essential.
The Essential models are based on the most essential specifications and options, which a modern up to date trailed sprayer must have nowadays. Especially for the medium market segment of arable farms and mixed farms.
Ease of use
The iXtrack T4 Essential will have the innovative iXspray hardware and software with intuitive touch interface guarantees and user friendly operation of the sprayer. The iXtrack T4 is standard equipped with the ErgoDrive functionality and has manual valves (iXclean Comfort as an option).
Stability
Like the iXtrack T4 is the iXtrack T4 Essential model equipped with a smooth, suspended parallelogram that is active in spraying position, but also during transport for optimal boom stability. The parallelogram combines optimal stability with soft boom balancing and limited vertical movement to minimise spray height deviations, securing correct crop coverage.
Intelligent Electronics
The iXtrack T4 Essential is fully ISOBUS compatible. It means easy plug and play with the IsoMatch Tellus GO+ or PRO or any other AEF certified (tractor) terminal as an option.
Techncial specifications
iXtrack T4 Essential |
||
Nominal tank capacity |
3400 litres |
4000 litres |
Maximum tank capacity |
3840 litres |
4350 litres |
Spray booms |
HSA 21-24 metres (2 part folding) |
|
HSA 27-28 metres (2 part folding) | ||
HSS 18-24 metres (2 part folding) | ||
HSS 27-30 metres (3 part folding) | ||
Pump |
260 l/min |
|
Wheel axle |
Adjustable axle without steering or steering axle (1.50 – 2.25m) |
Præcisionslandbrug
Lavet til smart, effektivt og nemt landbrug
IsoMatch GEOCONTROL er et avanceret software-program inden for IsoMatch Tellus og IsoMatch Tellus GO+, der hjælper dig med at styre alle ISOBUS kompatible Kverneland Group maskiner såsom sprøjter, spredere og såmaskiner! Kombineret med en GPS-modtager opfylder den fremtidens behov med hensyn til nemt, smart og effektivt landbrug!
Whether you are a farmer or contractor with a fleet, IsoMatch FarmCentre gives you a complete overview of your business. You can track the movement of your fleet in real time or verify later where your machines have been operating. Keeping track of multiple machines spread over vast areas has never been so easy! Additionally, all alerts and notifications are sent directly to the IsoMatch FarmCentre web application, and the history of alerts is saved. Allowing dealer to access your account for remote support will decrease the risk of downtime and increase your productivity. With IsoMatch FarmCentre, machine performance parameters can be tracked and analysed for optimal performance. Actual information about quantity of pressed bales, fertiliser consumption and more is shown in the application. All this you can check remotely from a computer or even a tablet or smartphone.
Når der besluttes, hvilket udstyr der skal købes, er det ikke altid let at finde den optimale løsning på det brede marked, som der tilbydes i dag. Teknologien udvikler sig hurtigt, da vores traktorer og redskaber er mere og mere udstyret med højteknologisk elektronik. Vi forstår denne kompleksitet og er forpligtet til at give dig nemme landbrugsløsninger. derfor er disse omkostningseffektive ISOBUS Universal Terminals, IsoMatch Tellus PRO og IsoMatch Tellus GO+ lavet til dem der ønsker en nem og effektiv maskinstyring.
Med sine avancerede hardware og softwarefunktioner leverer IsoMatch Tellus PRO den optimale præcisionslandbrugsløsning til et alt-i-et kontrolsystem i dit traktorførerhus.
IsoMatch Tellus PRO er centrum for tilslutning af alle ISOBUS maskiner og en platform til kørsel af præcisionslandbrugsapplikationer. Det giver alt, hvad en landmand har brug for, for at få mest muligt ud af sine maskiner og afgrøder, samt med omkostningsbesparelser i gødning, kemikalier og frø ved automatisk sektionskontrol og variabel satskontrol. Med den unikke dobbeltskærms funktion giver det mulighed for at se og styre to maskiner og processer samtidigt.
Arbejd nemt, vær i kontrol.
IsoMatch Tellus GO+ er specielt udviklet til at styre maskinen på en enkel måde. Landmanden har fuld kontrol over maskinen på præcis den måde, han ønsker. Maskinen kan nemt sættes op med de bløde taster via 7" touch skærm og optimal kontrol under kørslen skal du bruge de hårde taster og drejekontakten. det har aldrig været så nemt at styre redskabet.
Det kan være dit første skridt ind i præcisionslandbrug, aldrig har det været så let.
IsoMatch Tellus GO+ gør det nemt at styre enhver ISOBUS maskine fra dit førerhus. IsoMatch GEOCONTROL giver dig mulighed for at opnå hørere udbytte, lavere omkostninger og gøre dit arbejde meget lettere. Denne licensnøgle er opdelt i to dele, sektionskontrol og variabel ratekontrol, som er tilgængelig fra IsoMatch Shop. Nu kan du købe den specifikke funktionalitet, du har brug for.
With manual guidance you are perfectly on track.
The IsoMatch InLine is a light bar which allows easy manual guidance. It is the perfect assistant to get you as close as possible to your desired A-B line. Mounted in the line of sight, you can easily see the distance from the A-B line and to which direction you should steer for the ideal position. The display of the IsoMatch InLine also displays the status of the machine sections, which adds more comfort of use. The LEDs can be dimmed for night operation.
SMART
Distance to A-B line with LED indication and a numeric display
EFFICIENT
Manual guidance in combination with IsoMatch GEOCONTROL
EASY
Displays status of machine sections
The essential accessory for IsoMatch GEOCONTROL.
The IsoMatch Global 2 is the GPS antenna, with DGPS accuracy, in the IsoMatch product range. It enables satellite navigation for site-specific section control, variable rate application, manual guidance and field registration.
SMART
Allows manual guidance, automatic section control and variable rate in combination with IsoMatch GEOCONTROL
EFFICIENT
DGPS accuracy without additional subscription fees
EASY
Easy to fit with mounting brackets included
Connect to a local wireless network on your IsoMatch Tellus.
IsoMatch Wireless (USB-stick) is complementary to the IsoMatch Tellus and makes it easy to connect to a local wireless network, such as your phone’s hot-spot, home network etc.
No additional costs of an internet service provider. When connected via the IsoMatch Wireless you can browse the internet, view the weather, Gmail, Google, etc.
The IsoMatch Eye is the camera option in the IsoMatch product range.
IsoMatch Eye is a camera that has been developed for use with our sophisticated IsoMatch Tellus and IsoMatch Tellus GO dual screen terminal. The IsoMatch Eye is switchable from rear view to standard view.
It gives you full control and overview of entire machine operation during day and night, because of its night vision by integrated LED’s. This increases the safety e.g. when reversing the machine or manoeuvring around obstructions.
SMART
Changeable from rear view to standard view
EFFICIENT
Full control and overview of entire machine operation
EASY
Night vision by integrated LED’s
The IsoMatch Grip is an ISOBUS auxiliary device developed for great operator comfort and efficient machine control. Its ergonomic shape and the complete freedom of assigning and controlling a total of 44 implement functions from one device are unique in the market today. From your fingertips you have endless possibilities to operate all machine functions as desired. And assignments are saved per machine making it even more applicable to your needs.
Quicker support in finding a fault in Kverneland Group machines
IsoMatch TopService is the new service tool software which replaces the “FlashCan” software. The tool includes significant improvements of user interface and functionality in addition to new advanced features.
Teknisk specifikation
Teknisk specifikation
Download brochureiXtrack T4 | ||||
---|---|---|---|---|
Nominal tank volume (l) | 3400 | 4000 | 4600 | |
Maximum tank volume (l) | 3840 | 4350 | 4835 | |
Chemical inductor (l) | 37 | 37 | 37 | |
Clean water tank (l) | 620 | 620 | 620 | |
Hand wash tank (l) | 32 | 32 | 32 | |
Spray boom (m) | HSA 21-33/HSS 18-40/30-24/36-24/HC 18-30 | HSA 21-33/HSS 18-40/30-24/36-24/HC 18-30 | HSA 21-33/HSS 18-40/30-24/36-24/HC 18-30 | |
Pumps (l/min) | 200/260/400/520 | 200/260/400/520 | 200/260/400/520 | |
iXclean | iXclean Comfort/iXclean Pro | iXclean Comfort/iXclean Pro | iXclean Comfort/iXclean Pro | |
Controls for ISOBUS Electronics | IsoMatch Tellus PRO/GO+ or any other ISOBUS terminal | IsoMatch Tellus PRO/GO+ or any other ISOBUS terminal | IsoMatch Tellus PRO/GO+ or any other ISOBUS terminal | |
Wheel axle (m) | Adjustable from 1.50-2.25 | Adjustable from 1.50-2.25 | Adjustable from 1.50-2.25 | |
Drawbar | Top or hitch linkage in combination with pulling eye or ball coupling | Top or hitch linkage in combination with pulling eye or ball coupling | Top or hitch linkage in combination with pulling eye or ball coupling |
Teknisk specifikation
Teknisk specifikation
Download brochureiXtrack T4 | |||
Tank capacity |
3400 litres |
4000 litres |
4600 litres |
Spray booms |
HSA 21 - 33m / HSS 18 - 40m, 24/30m and HC 18-30m |
||
Drawbar |
Top- or hitch linkage in combination with pulling eye or ball coupling |
||
Wheel axle |
Adjustable, 1.50 - 2.25m |
||
Pumps |
200 - 260 - 2x 200 - 2x 260 l/min |
||
Clean water tank |
500 litres |
||
Regulation systems |
IsoMatch Grip in combination with IsoMatch Tellus PRO, IsoMatch Tellus GO or any other ISOBUS terminal |
||
iXclean |
iXclean Comfort - iXclean Pro |