Kverneland Saturia
Kverneland Saturia - kompakt, robust og effektiv.
Kultivatormonteret såmaskine, perfekt til mellemstore gårde
Højdepunkter
- Precise seed placement by CX-II coulter
- Cost-efficient and straightforward
- Reduced power requirement due to compact design
- No soil compaction in the tracks
Beskrivelse
Den kultivatormonterede pneumatiske såmaskine Kverneland Saturia er den perfekte løsning til mellemstore landbrug, der er på udkig efter en effektiv og robust såmaskine. Saturia fås i arbejdsbredder på 3,0 og 4,0 meter og har en beholderkapacitet på 750 eller 1.000 liter.
Takket være den universelle koblingstrekant kan Saturia monteres på eksisterende Kverneland rotorharver og alle andre jordbearbejdningsredskaber. Det kompakte design af den kultivatormonterede såmaskine med et tæt tyngdepunkt reducerer maskinens behov for løftekraft.
Beholderens presenning beskytter frøene og fordelingshovedet sikkert mod støv og fugt. Den kan åbnes helt for påfyldning med frontlæsser, big bags eller påfyldningssnegl. Den mekaniske doseringsanordning tillader udsædsmængder fra 2 til 380 kg/ha fra fine til større frø. Saturia er udstyret med CX-II såskær til præcis placering af såsæden. Til brug af rotorharven alene er der mulighed for manuel eller hydraulisk løft af skærstangen.
Højdepunkter
- Reduceret effektbehov på grund af kompakt design med tæt tyngdepunkt
- Ingen jordkomprimering i sporene
- Præcis placering af såsæden med CX-II-skæret
- Jævn dybdekontrol med justering af skærtrykket
- Reduceret opsætningstid, øget ydeevne på grund af stor beholder på op til 1.000 liter
- Sikker adgang via læssetrin
Funktioner
Funktioner
- The central, totally enclosed cell wheel of the metering device accurately measures the required volume of seed and discharges it into the venturi cone where it is mixed with the air stream and then conveyed through the diffuser tube and the seed delivery hoses to the coulters.
- The distribution head is mounted in a protected position inside the seed hopper.
- The central metering device accurately metres any desired volume of seed from 2kg per hectare to 380kg per hectare
- For the sowing of fine seeds, e.g. rape or grass, the metering device can be infinitely adjusted to fine seed/micro-metering by means of a spindle, without any need for tools.
- The metering system is mechanically driven via the spiked landwheel running in the tilled soil.
- The metering device is centrally positioned and easily accessible under the hopper.
- The CX-II disc coulter from Kverneland not only guarantees smoother running but also exact seed placement.
- The flatter cutting angle of only 5.4° of the steel disc requires less pulling power to reach a constant seeding depth of up to 6cm.
- Due to the combination of the steel disc with a diameter of 325mm and the flexible plastic disc, there is no need for independent scrapers, saving the cost for expensive wearing parts. In addition the coulter is completely maintenance-free!
- Up to 50kg coulter pressure can be achieved by a pre-loaded spring. Safe operation is ensured when working with high working speeds and high quantities of plant residues on the soil surface.
- An inter-row coulter spacing of 445mm for maximum clearance and the following press wheel (standard equipment) ensure an optimum seed/soil contact in all conditions.
- The press wheels can be set in fixed, floating of lifted position in order to be able to adapt quickly to changing weather, soil or working conditions.
- The CX-II coulter is also available as light edition without press wheel which reduces the weight and length of the coulterbar. This will allow to operate the seeding combination also with lower lifting capacity of the tractor.
- The drill can be ordered with two different row spacings of 12.5cm or 25.0cm according to individual farming systems.
- The CX II coulters are clamped in staggered position over 2 rows by short and longer brackets.
- More clearance means different seed density and micro climate in the crop.
Choice of sowing distance
Sowing distance 12.5cm
- Best distribution for high seed rates
- Rows close quickly
- Reduced weed pressure
- Efficient use of nutrients, water and sun
Sowing distance 25cm
- Optimised micro climate reduces fungal infestation
- Less seeds needed per m² with new type of seeds (hybrid)
- Saving on water resources
- Reduced pulling force requested
- Better clearance in wet conditions
Teknisk specifikation
Teknisk specifikation
Download brochureSaterra 1030 |
Saterra 1040 |
|
Frame |
cultivator-mounted |
cultivator-mounted |
Working width (m) |
3.0 |
4.0 |
Transport width (m) |
3.0 |
4.0 |
Hopper capacity (l) |
750 |
750 |
Hopper extensions - option (l) |
250 |
250 |
Mechanical metering device (no.) with micro metering |
Standard (1) |
Standard (1) |
No. of coulters at 12.5cm distance / 25cm distance |
24 / 12 |
32 / 16 |
Min. power requirement (HP/kW)* |
123/90 |
163/120 |
Weigth (kg) with coulters |
1100 |
1270 |