Kverneland Roc 1073 S
Universale pick up river
Universale pick up river med variabel arbejdsbredde fra 7 til 7,3 m
Højdepunkter
- Et bælte med savformede, glasfiberforstærkede tværstænger
- Brede affjedrede tandemhjul under bæltet giver beskyttelse til græsmarker
- Det unikke bæltedesign resulterer i jævne og luftige skår
- Afgrødeplacering og skårvolumen kan være meget alsidig
- Takket være den store mængde olie er der ikke behov for en køleventilator
Beskrivelse
Kverneland Roc 1073 S er en maskine, der er designet med to pickup-enheder, som kan skiftes hydraulisk, så føreren kan bruge den til side- eller centerudlægning. Sideudlægningen har en minimum arbejdsbredde på 7 m, mens midterskåret kan udvides til maksimalt 7,30 m. De bemærkelsesværdige egenskaber omfatter fremragende affjedring til løft og transport af afgrøder uden jordforurening. Dens pickup og valse med seks stænger fungerer godt til forskellige ensilageskæringer, og det forstærkede bælte har savklingeformede tværstænger til alle afgrødeforhold. Derudover kan den fuldt ophængte valse løftes hydraulisk fra kabinen i enhver position til tørre afgrøder i store mængder. Kverneland Roc 1073 S kan klappes sammen til 2,5 m bredde for nem vejtransport og har vejaffjedring for komfortabel og hurtig transport.
Højdepunkter
- Bagmonteret 2-båndsfusion med variabel arbejdsbredde fra 5,95 m til 7,30 m.
- Designet til universel brug som side- eller midterskårlægger.
- Unikt opsamlingssystem med 6 stænger for at sikre en ren sammenlægning.
- En 250 mm rulle nær tænderne garanterer et jævnt materialeflow for den bedste skårlægning, selv i korte afgrøder.
- Unikt transportophæng med centralt ophængt vendepunkt for pickupenheder og tandemhjul.
- Elektrisk højdejusteringssystem
- God styring og manøvredygtighed
- Sammenklappelig i 2,5 m bredde til vejtransport.
- Nem vedligeholdelse, kvalitet og udskiftning af komponenter.
- En intuitiv styreenhed betjener alle vigtige funktioner.
Funktioner
- Large roller to operate in all crops
- The roller is in all positions hydraulic suspended
- Specially designed belt and pickup
- If the crops are dry, the roller can be lifted from the cabin to protect the leaves
- A single belt system with two pick-ups
- Fiberglass-reinforced saw blade-shaped crossbars provide optimal transportation for dry and wet crops
- An actively-driven belt, equipped with a sprocket and gear belt, ensures continuous operation even in heavy crop conditions
- Most maintenance and repairs can be done without removing the belt, and all parts can be disassembled with a single wrench
- The speed of the belt and pick-up can be precisely adjusted
- The tension of the belt is evenly distributed between the left and right sides since it is adjusted centrally
- Controlled pick-up with two cams and six tine bars
- For heavy crops such as silage and maize straw, it is recommended to use wide stripes
- Heavy-duty plastic strippers maintain shape when hitting rocks and their design prevents crop loss
- Even the shortest crop can be transported on the belt with the hydraulic adjustable roller suspended in all independent positions
- Replacing tines with only two bolts to remove (one per tine and one per plastic stripper) using only one hand
- It is possible to repair bearings, cam track, and tine bars without the need to disassemble the pick-up
- Electric height adjustment
- The machine is designed for both centre and side delivery
- The side delivery has a working width of 7m, expanding to a maximum of 7.3m
- With expanded pickups, the rake can create a central swath or side belts turning left or right
- As the crop is transported on the belt, there is no roping, so the swath can be picked up and transported several times
- Our mergers are designed and built to be maintenance-friendly
- All components can be easily disassembled
- Wear parts are in small size and replaceable with limited efforts
- To ensure a high speed and a clean crop in all conditions, four suspensions are used
- The pickup's standard tandem wheels protect the ground from damage
- The tandem wheel comes equipped with a spring suspension system
- With a transport width of only 2.5 m the machine can travel easily on narrow roads and does not require any special permissions
- An easy-to-use control panel manages all essential functions.
- The terminal provides optional features such as belt auto-stop when lifting the machine to ensure a clean swath ending
- The safety system allows basic machine functions and operation without electronics
- Large roller to operate in all crops
- The roller is in all positions hydraulic suspended
- Specially designed belt and pickup
- If the crops are dry, the roller can be lifted from the cabin to protect the leaves
- A single belt system with two pick-ups
- Fiberglass-reinforced saw blade-shaped crossbars provide optimal transportation for dry and wet crops
- An actively-driven belt, equipped with a sprocket and gear belt, ensures continuous operation even in heavy crop conditions
- Most maintenance and repairs can be done without removing the belt, and all parts can be disassembled with a single wrench
- The speed of the belt and pick-up can be precisely adjusted
- The tension of the belt is evenly distributed between the left and right sides since it is adjusted centrally
- Controlled pick-up with two cams and six tine bars
- For heavy crops such as silage and maize straw, it is recommended to use wide stripes
- Heavy-duty plastic strippers maintain shape when hitting rocks and their design prevents crop loss
- Even the shortest crop can be transported on the belt with the hydraulic adjustable roller suspended in all independent positions
- Replacing tines with only two bolts to remove (one per tine and one per plastic stripper) using only one hand
- It is possible to repair bearings, cam track, and tine bars without the need to disassemble the pick-up
- Electric height adjustment
- The machine is designed for both centre and side delivery
- The side delivery has a working width of 7m, expanding to a maximum of 7.3m
- With expanded pickups, the rake can create a central swath or side belts turning left or right
- As the crop is transported on the belt, there is no roping, so the swath can be picked up and transported several times
- Our mergers are designed and built to be maintenance-friendly
- All components can be easily disassembled
- Wear parts are in small size and replaceable with limited efforts
- To ensure a high speed and a clean crop in all conditions, four suspensions are used
- The pickup's standard tandem wheels protect the ground from damage
- The tandem wheel comes equipped with a spring suspension system
- With a transport width of only 2.5 m the machine can travel easily on narrow roads and does not require any special permissions
- An easy-to-use control panel manages all essential functions.
- The terminal provides optional features such as belt auto-stop when lifting the machine to ensure a clean swath ending
- The safety system allows basic machine functions and operation without electronics
Teknisk specifikation
Teknisk specifikation
Download brochure
|
Working width center swath (m) |
Pick-up width (m) |
Belts n |
Transport width (m) |
Power requirement (hp) |
Weight (kg) |
Kverneland Roc 1073 S |
7-7.3 |
2x2.95 |
2 |
2.5 |
70 |
3440 |