Plov - Tjekliste! -Er du klar til sæsonstart?
Nyttige tips og tricks til at få din plov klar, så du får mest muligt ud af din sæson.
YOUR PARTS SPECIALIST
Find your local Kverneland dealer
Only Original Parts will keep your machine a Kverneland
Vær forberedt på den kommende sæson - Ved at give din Kverneland-plov et sundhedstjek og sørge for, at du har tilstrækkeligt nok på lager med vigtige sliddele. Hold tiden nede på et minimum ved at kontakte din lokale Kverneland-forhandler og drage fordele af de specielle priser uden for sæson på originale dele.
Check all wearing parts and renew if worn
Grease all bearings and pivot shafts
Ensure Auto Reset springs are correctly adjusted to 70cm
Ensure all skimmers are correctly set
Check Vari width Bushes and cones – replace if worn
Check Hydraulic hoses and connections. Replace if necessary
Check front linkage pins and renew if worn
Ensure front slide rails are clean and greased
Mouldboard
Thanks to our unique heat treatment processes, our steel guarantees long lasting mouldboards with unique benefits to give you maximum value for money.
Cross section of a mouldboard
1. Soft and flexible core to avoid breakage.
2. Hard surface for less friction and longer lifetime.
Point & share
All our points and shares are specially heat treated using Kverneland’s unique Zone Hardening method. Improving the quality of the steel and protecting the area around bolts holes are key factors to achieving top performance and long life time.
Infrared camera: heat treatment
1. Extremely hard wearing zones.
2. Area around bolt holes flexible to avoid breakages.
KNOCK-ON POINT
“Fast point changes with no bolts. Excellent soil penetration for dry soil.”
QUICK-FIT POINT
“Fast point changes with no bolts. Flushed system to minimise friction.”
REVERSIBLE POINT
“The classic, suitable for all conditions. Heat treated for maximum lifetime.”
FLUSH POINT
“Flushed system to minimise friction. The perfect choice for sticky soil.”
AUTO RESET
For ploughs fitted with Kverneland’s unique Auto Reset system, we recommend that you loosen all the leaf springs before winter storage. Releasing the spring tension when not in use will increase lifetime of the springs.
At the beginning of the season remember to adjust and tighten the leaf springs to a distance of 70 cm between the pins. It is also important to lubricate the grease nipple of each beam to maintain the correct plough leg release.
LEAF SPRING KITS
The standard Auto-Reset system includes 7 Kverneland heat treated leaf springs. For heavier to extreme soil conditions, extra leaf springs may be added to withstand higher resistance before releasing the plough legs.
STANDARD SPRING KIT
640 kg release force
KK060709
HD KIT
900 kg release force
KK060703
EXTRA HD SPRING KIT
1100 kg release force
KK060703 (1x)
KK057068 (2x)
TANDEM SPRING KIT
1400 kg release force
KK060703 (1x)
KK060714 (1x)
DISTRIBUTION CENTRE METZ - SERVICE 24/7
Time is money, and we know the importance of receiving the right parts at the right time! Your Kverneland dealer is supported by a massive distribution network to supply you with exactly what you need, when you need it.
Our main distribution centre Metz warehouse is located in Thionville, France. A strategic location for distributing parts to all corners of the world. With over 70.000 parts in stock and 24/7 service, we are ready to supply you with parts – at any time!
