Kverneland iXtrack C

High tech trailed sprayer range with tank sizes from 3.000, 4.000 and 5.000 litres! Three different boom types from 18 up to even 45 metres available! 

Are You Ready for A New iXperience?

The Kverneland iXtrack trailed sprayer range is developed with big focus on operator comfort and environmental protection. The iXtrack C offers tank volumes of 3000, 4000 and 5000 litres in combination with HSS 18-40 metre steel booms (18-30m 2-part folded and 27-40m 3-part folded) or HSA 24-33 metre aluminium booms. The third available boom is the HBWP with 45 metre boom width. It has a low centre of gravity and compact dimensions for higher working speeds and easy transportation on the road. The iXtrack C is also available with ISOBUS intelligence for features like the IsoMatch Tellus terminals, iXflow recirculation system, IsoMatch GEOCONTROL, Ergodrive head land management and Boom Guide spray height control system. iXclean Comfort or iXclean Pro will give you even more operator comfort as functions like filling, spraying, rinsing and so on can be controlled out of the tractor cabin!

The Advantages:

  • HSS or HBWP side folding or HSA high tech aluminium spray booms
  • Wheel axle options to fulfil your requirements
  • Easy operation, including Easy Set control panel
  • Non ISOBUS or ISOBUS compatible regulation systems
  • iXclean: every litre counts!
  • Possible in combination with IsoMatch GEOCONTROL

Technical Specifications

iXtrack C C30 C40 C50
Tank capacity 3000 (l) 4000 (l) 5000 (l)
Spray booms HSS 18-40 / HSA 24-33 m HSS 18-40 / HSA 24-33 / HBWP 45 m HSS 18-40 / HSA 24-33 / HBWP 45 m
Drawbar Low or Top linkage (un)suspended, steering Low or Top linkage (un)suspended, steering Low or Top linkage suspended
Wheel axle Adjustable or suspended, steering Adjustable or suspended, steering Adjustable or suspended, steering
Pumps 200 - 250 - 400 - 500 l/min 200 - 250 - 400 - 500 l/min 200 - 250 - 400 - 500 l/min
Regulation systems FMC - IsoMatch Tellus - IsoMatch Tellus GO FMC - IsoMatch Tellus - IsoMatch Tellus GO FMC - IsoMatch Tellus - IsoMatch Tellus GO
iXclean iXclean Comfort or Pro iXclean Comfort or Pro iXclean Comfort or Pro

Spray Booms

HSS 18-20-21-24-27-28-30-32-33-34-36-38-39-40 m Compact Folding Steel Boom

  • The HSS boom range is designed for professional use. The special HSS profile combines a minimum of weight with maximum strength and stability. Computer assisted design, use of laboratory and field tests, special hardened Domex steel contribute to the legendary reputation of this long lasting heavy duty high quality booms. The HSS boom consists out of a range of 2-part folding (18-30m) and 3-part folding (27-40m) spray booms.

HSA 24-27-30-32-33 m High Tech Side Folding Aluminium Boom

  • Efficient protection of the nozzle holders within the bottom profile of the boom. This profile is designed for easy cleaning. With no sharp angles, no liquid and residues can be trapped. The anodised surface protects against corrosion and scratches. Aluminium bonding instead of welding provides a weight saving and remarkable strength. Patented aerospace technology has consistently proven itself.

HBWP 45 m Compact Side Folding Steel Boom (fits only on iXtrack C)

  • Perfect boom guiding in hilly or flatland position through a professional double trapezium balancing system. In flatland position the boom is perfectly levelled out and compensates a wrong position of the sprayer compared to the field shape. In hilly conditions the HBWP boom is following automatically the inclination of the sprayer.

Hjulaksler

Vælg hjulaksel:

  • Justerbar affjedret aksel, skydbar 1,75 – 2,25 m. TwinFlex affejdring
  • Affjedet aksel: Fast sporvidde, vælg mellem alt fra 1,80 – 2,25 m. Twinflex affjedring
  • Affjedret sporfølgeaksel: Fast sporvidde, vælg mellem alt fra 1,80 – 2,25 m. Twinflex affjedring, Autotrac sporfølgeaksel
  • Alle hjulaksler leveres som standard i Danmark inklusiv hydrauliske bremser.

Autotrack sporfølgesystem

  • Det computerstyrede sporfølge system Autotrac, sikrer den mest skånsomme kørsel i afgrøden, så nedkørsel holdes til et minimum, og bommens bevægelse bliver mere rolig i sving. Der er automatisk opretning, når der skal bakkes og mulighed for manuel tvangsstyring.

TwinFlex – aksel affjedring

  • iXtrack C er udstyret med hydraulisk affjedring, som giver en utrolig rolig affjedring med absolut minimal højdepåvirkning og høj bomstabilitet med kontant dysehøjde. Det dynamiske system er kraftigt affjedret, når tanken er fuld og blødt affjedret, når tanken er tom.

HydroFlex trækstangsaffjedring

  • Trækstangen er affjedret ved hjælp af kraftige gummiophæng. Dermed bliver både transport og arbejde i marken, selv ved høje hastigheder, langt mere skånsomt for både traktor, sprøjte og ikke mindst brugeren.

Brugervenlig

Easy Set kontrolpanel

  • Kontrolpanelet er enkelt og brugervenligt udformet. Én hane til sugesiden og én hane til tryksiden. Hanerne er godt beskyttede bag sideskærmen, så de holdes fri for skidt og kemi – klar til brug.

Let adgang

  • Sideskærmene giver nem adgang til EasySet kontrolpanelet. Brugervenlighed er i højsædet, både i forhold til adgang og tilslutninger.

Lydsvage stempel/membranpumper

  • Afhængig af behov kan man vælge mellem et bredt udvalg af pumper. Kapaciteter fra 200 til 500 l/min er muligt. Pumperne sammensættes efter behov.

Omrøringssystem

  • Unikt omrøringssystem (er standard på alle iXtrack sprøjter), holder blandingen optimal under arbejdet og kan nemt slås fra for at undgå skumdannelse. Højtryksomrøring via injektordyser er ligeledes standard, og sikrer lynhurtig opblanding efter fyldning eller stilstand. 

iXclean: Hver liter tæller

Elektrisk niveaumåler

  • Med en elektrisk niveaumåler vises det aktuelle tankindhold både på kontrolterminalen samt på det eksterne display ved Easy Set kontrolpanelet.

iXclean Comfort

  • iXclean Comfort er semiautomatisk ventilkontrol. Kombinationen af en elektrisk niveaumåler og sugeventil giver høj grad af komfort og præcis påfyldning: Automatisk fyldestop når det forprogrammerede niveau er nået. Fjernbetjening af alle ENFO skylle- og fyldefunktioner uden at forlade kabinen! Enkel fyldning af dyselinjerne inden sprøjtning samt skylning efter sprøjtning. Skylning kan også gøres med tanken fuld – uden risiko for fortynding.

iXclean Pro

  • iXclean Pro er fuldautomatisk ventilkontrol til ISOBUS sprøjter. Alle funktioner kan betjenes fra kabinen. Det gør det ekstremt let at skifte mellem omrøring, sprøjtning, fortynding, fyldning og rensning. Med i iXclean Pro er udover automatisk fyldestop også fuldautomatisk multitrins vaskeprogram, som kommer omkring hele sprøjten. Med et tryk på bare én knap starter en komplet vask af alle væskelinjer. Få minutter senere er hele sprøjten rengjort - med minimalt vandforbrug. Den automatiske rengøring er så grundig, at restindholdet i væskesystemet er fortyndet til 1% koncentration!! iXclean Pro til fyldning og rengøring får hver liter til at tælle!

ENvironmental Focus (ENFO)

  • ENFO fyldning og skylning – er standard på alle sprøjtecomputerer. Denne unikke egenskab optimerer fyldnings- og skylningsprocessen af dyselinjerne. Præcis tildeling, ingen spild af værnemidler og stor vandbesparelse giver fordele til både dig og miljøet!  

Sprayer Features iXtrack

  • ISOBUS intelligence (FMA regulater only)
    You are ensured of the ISOBUS compatibiliy from tractor to the sprayer and sprayer to tractor, meaning that all data collection from your machine(s) is centralised and can be easily transferred to your Terminal (e.g. IsoMatch Tellus) in your tractor cabin.
  • iXflow Spray Line Recirculation
    iXflow is our sophisticated spray line recirculation system with pneumatic nozzle control. In combination with the iXtrack sprayer this combination creates a robus and fast-reacting spraying system, better suited to higher spraying speeds and automatic functions with GPS. iXflow is an air operated system. This means immediate nozzle reaction for start/stop spraying with GPS section control. It also has a continuous flow, so no risk of sedimentation or setting in the spray lines.
  • Boom Guide Comfort
    Two ultrasonics sensors on the boom can control the spray height via the central slope correction and boom lift functions. This cost effective system is suited to gentle slopes and uneven crop conditions.
  • Boom Guide Pro
    This advanced system used three ultrasonic sensors to control left- and right-hand boom sections independently for the ultimate guidance in the most challenging field conditions. It can deliver positive and negative lateral movement on each side of the boom to follow the contours in every condition!
  • EgroDrive: Headland Management System
    ErgoDrive headland management system assists you on the headland turns. Activated by simply switching spraying ON or OFF. The ErgoDrive controls all the necessary actions, while you can focus on safe driving.
  • Starguide IV: Automatic GPS section control and guidance by D-GPS
    Those who have used it will never go back. Starguide IV will change your spraying days forever: spray around the headland and the Starguide IV will control the spray sections automatically as you can cover the remainder of the field.

Please note that the features above are only possible in combination with iXtrack B and C (and not with iXtrack A), except the Starguide IV. 

Control Systems - NON ISOBUS

FlowMate Control FMC: Basic Spray Computer

  • Extremely simple to operate
  • Very compact by integration of all spraying and hydraulic functions
  • Integrated nozzle advice
  • Field memory for 25 different fields

iM FARMING

Smart efficient easy farming

IsoMatch GEOCONTROL

Lavet til smart, effektivt og nemt landbrug

IsoMatch GEOCONTROL er et avanceret software-program inden for IsoMatch Tellus og IsoMatch Tellus GO+, der hjælper dig med at styre alle ISOBUS kompatible Kverneland Group maskiner såsom sprøjter, spredere og såmaskiner! Kombineret med en GPS-modtager opfylder den fremtidens behov med hensyn til nemt, smart og effektivt landbrug!

More about IsoMatch GEOCONTROL >

IsoMatch-GEOCONTROL-Field

ISOBUS

Når der besluttes, hvilket udstyr der skal købes, er det ikke altid let at finde den optimale løsning på det brede marked, som der tilbydes i dag. Teknologien udvikler sig hurtigt, da vores traktorer og redskaber er mere og mere udstyret med højteknologisk elektronik. Vi forstår denne kompleksitet og er forpligtet til at give dig nemme landbrugsløsninger. derfor er disse omkostningseffektive ISOBUS Universal Terminals, IsoMatch Tellus PRO og IsoMatch Tellus GO+ lavet til dem der ønsker en nem og effektiv maskinstyring.

More about ISOBUS Universal Terminals >

IsoMatch Tellus PRO

Med sine avancerede hardware og softwarefunktioner leverer IsoMatch Tellus PRO den optimale præcisionslandbrugsløsning til et alt-i-et kontrolsystem i dit traktorførerhus.

IsoMatch Tellus PRO er centrum for tilslutning af alle ISOBUS maskiner og en platform til kørsel af  præcisionslandbrugsapplikationer. Det giver alt, hvad en landmand har brug for, for at få mest muligt ud af sine maskiner og afgrøder, samt med omkostningsbesparelser i gødning, kemikalier og frø ved automatisk sektionskontrol og variabel satskontrol. Med den unikke dobbeltskærms funktion giver det mulighed for at se og styre to maskiner og processer samtidigt. 

IsoMatch Tellus GO+

Arbejd nemt, vær i kontrol.

IsoMatch Tellus GO+ er specielt udviklet til at styre maskinen på en enkel måde. Landmanden har fuld kontrol over maskinen på præcis den måde, han ønsker. Maskinen kan nemt sættes op med de bløde taster via 7" touch skærm og optimal kontrol under kørslen skal du bruge de hårde taster og drejekontakten. det har aldrig været så nemt at styre redskabet.

Det kan være dit første skridt ind i præcisionslandbrug, aldrig har det været så let.
IsoMatch Tellus GO+ gør det nemt at styre enhver ISOBUS maskine fra dit førerhus. IsoMatch GEOCONTROL giver dig mulighed for at opnå hørere udbytte, lavere omkostninger og gøre dit arbejde meget lettere. Denne licensnøgle er opdelt i to dele, sektionskontrol og variabel ratekontrol, som er tilgængelig fra IsoMatch Shop. Nu kan du købe den specifikke funktionalitet, du har brug for.

More about IsoMatch Tellus GO+ >

IsoMatch InLine

With manual guidance you are perfectly on track.

The IsoMatch InLine is a light bar which allows easy manual guidance. It is the perfect assistant to get you as close as possible to your desired A-B line. Mounted in the line of sight, you can easily see the distance from the A-B line and to which direction you should steer for the ideal position. The display of the IsoMatch InLine also displays the status of the machine sections, which adds more comfort of use. The LEDs can be dimmed for night operation.

SMART   
Distance to A-B line with LED indication and a numeric display

EFFICIENT 
Manual guidance in combination with IsoMatch GEOCONTROL 

EASY           
Displays status of machine sections

IsoMatch Global 2

The essential accessory for IsoMatch GEOCONTROL.

The IsoMatch Global 2 is the GPS antenna, with DGPS accuracy, in the IsoMatch product range. It enables satellite navigation for site-specific section control, variable rate application, manual guidance and field registration.

SMART
Allows manual guidance, automatic section control and variable rate in combination with IsoMatch GEOCONTROL

EFFICIENT
DGPS accuracy without additional subscription fees

EASY
Easy to fit with mounting brackets included

IsoMatch Wireless

Connect to a local wireless network on your IsoMatch Tellus.

IsoMatch Wireless (USB-stick) is complementary to the IsoMatch Tellus and makes it easy to connect to a local wireless network, such as your phone’s hot-spot, home network etc.
No additional costs of an internet service provider. When connected via the IsoMatch Wireless you can browse the internet, view the weather, Gmail, Google, etc.

More about IsoMatch Wireless >

IsoMatch_Wireless

IsoMatch Eye

The IsoMatch Eye is the camera option in the IsoMatch product range.

IsoMatch Eye is a camera that has been developed for use with our sophisticated IsoMatch Tellus and IsoMatch Tellus GO dual screen terminal. The IsoMatch Eye is switchable from rear view to standard view.
It gives you full control and overview of entire machine operation during day and night, because of its night vision by integrated LED’s. This increases the safety e.g. when reversing the machine or manoeuvring around obstructions.

SMART
Changeable from rear view to standard view

EFFICIENT
Full control and overview of entire machine operation

EASY
Night vision by integrated LED’s

IsoMatch MultiEye

IsoMatch MultiEye is an accessory for connecting multiple cameras to the IsoMatch Universal Terminal.

With the IsoMatch MultiEye you can connect multiple cameras to the IsoMatch Tellus or IsoMatch Tellus GO+ Terminal. You can easily switch between the cameras without the need for an additional screen in you tractor cabin. It gives you full control and overview of the entire machine operation during day and night, because of its night vision by integrated LED’s. This increases the safety when reversing the machine or manoeuvring around obstructions.

SMART
You can connect up to four IsoMatch Eye cameras and easily switch between the cameras with the remote control box which is standard included.

EFFICIENT
Full control and overview of entire machine operation from every side you want.

EASY
Night vision by integrated LED’s which increases the safety when reversing the machine or manoeuvring around obstructions.

IsoMatch Grip

The IsoMatch Grip is an ISOBUS auxiliary device developed for great operator comfort and efficient machine control. Its ergonomic shape and the complete freedom of assigning and controlling a total of 44 implement functions from one device are unique in the market today. From your fingertips you have endless possibilities to operate all machine functions as desired. And assignments are saved per machine making it even more applicable to your needs.

More about IsoMatch Grip >

IsoMatch_Grip_783x600

Spørg Kverneland