Kverneland e-drill compact & e-drill maxi

New integrated pneumatic seed drill - extremely operator-friendly

Kverneland is introducing two models of the new integrated pneumatic seed drills, the e-drill compact and e-drill maxi. These two models allow seedbed preparation, re-compaction and sowing in one pass.

The e-drill compact is offered with a hopper capacity of up to 1400 litres, the e-drill maxi up to 2000 litres.

Operator-friendly - innovative and precise depth control

A parallelogram and a quadruple joint of the e-drill ensure the optimum adjustment of the power harrow and coulterbar for a precise seed application. Important: the adjustment of the power harrow has no impact on the coulterbar respectively the sowing depth.

  Advantages:

  • Close centre of gravity for reduced lifting power requirement
  • Easily accessible metering device ELDOS
  • Simple and independent depth adjustment of the power harrow and the coulterbar
  • Precise seed placement by CX-II coulters
  • Central depth and pressure adjustment of the following harrow
Model e-drill compact e-drill maxi
Working width
(m)
3.0 / 3.5 / 4.0 3.0 / 3.5 / 4.0
Transport width
(m)
3.0 / 3.5 / 4.0 3.0 / 3.5 / 4.0
No. of coulters
(12.5 cm distance)
24 / 28 / 32 24 / 28 / 32
Weight (kg) 1120 / 1270 / 1350 1220 / 1300 / 1390

Pneumatic System - ELDOS

  • The metering device ELDOS accurately measures the required volume of seed by the distinctive rotor and discharges it into the seed injector where is is mixed with the air stream and then conveyed through the diffusor tube and the seed delivery hoses to the coulters. 
  • The distribution head is mounted in a protected position inside the seed hopper.

ELDOS - the new metering device

  • The new metering device is electric driven by e-com and is fully ISOBUS compatible.
  • GEOCONTROL by GPS signal is possible which avoids double seeding.
  • Special sensors ensure functionality from the tractor cab.
  • Four standard rotors are delivered for fine and large seeds or fertiliser.
  • A fifth rotor is offered as an option for maize, sunflowers and greening seeds.
  • The exchange of the rotors is quick and easily done without any tools.
  • Application rates from 1 to 400kg/ha are possible (depending on working speed and width).
  • The metering device is always easily accessible. 

Calibration

  • Very simple calibration test due to the separate seed guidance.
  • A remote control allows the driver to operate the calibration process at the metering device.  
  • No gear has to be adjusted. The driver simply enters the desired values into the terminal, presses one button to start at the metering device and that’s it.
  • The calibration is done automatically.
  • A calibration flap with an integrated gate prevents any seed from dropping into the hose.

CX-II coulter

  • The CX-II disc coulter from Kverneland not only guarantees smoother running but also exact seed placement.
  • The flatter cutting angle of only 5.4° of the steel disc requires less pulling power to reach a constant seeding depth of up to 6cm.
  • Due to the combination of the steel disc with a diameter of 325 mm and the flexible plastic disc, there is no need for independent scrapers, saving the cost for expensive wearing parts. In addition the coulter is completely maintenance-free!
  • Up to 35 kg coulter pressure can be achieved by a pre-loaded spring. Safe operation is ensured when working with high working speeds and high quantities of plant residues on the soil surface.
  • An inter-row coulter spacing of 445 mm for maximum clearance and the following press wheel (standard equipment) ensure an optimum seed/soil contact in all conditions.
  • The press wheels can be set in fixed or floating position in order to be able to adapt quickly to changing weather, soil or working conditions.

Euro-Connection

Flexibility is key!

The coulterbar can be easily coupled and uncoupled with a coupling hook similar to the front loader coupling. Track markers are attached to the power harrow. Therefore, the power harrow is ready for solo operation within short time. The coulterbar is attached with the Euro-Connection directly to the roller frame and can quickly and easily be hitched thanks to the readily accessible hydraulic and electronic interface.

The e-drill is exclusively designed to be combined with Kverneland power harrows (H-series and NGS). 

e-drill - Electronic Control

For the electronic control of the e-drill, a whole range of steering systems is available

Focus 3
Focus 3 is the new terminal steering the e-bas system which features hopper low level sensor, various tramline systems, information about ha, km/h monitoring of fan speed, pre-emergence marker, seed rate adjustments. Focus 3 is not ISOBUS compatible. 

IsoMatch Tellus GO
The multifunctional one-screen terminal has been developed for fast and simple control of all ISOBUS implements, giving the farmer a ‘customer made’ experience as it suits all needs for plain and efficient handling of farming machinery and tasks. IsoMatch Tellus GO is the farmer’s first step into Precision Farming. With the easy to use application, IsoMatch GEOCONTROL, it is possible to boost efficiency and save time and costs. The application includes Manual Guidance, Section Control and Variable Rate.

IsoMatch Tellus PRO

  • Two ISOBUS interfaces in one terminal
  • Multifunctional ergonomic design
  • ISOBUS Shortcut Button (ICB)

The IsoMatch Tellus PRO is the first ISOBUS terminal in the world with the capability to operate two different (machine) screens through one terminal, without the need to constantly toggle between screens. Via the ISOBUS connection, IsoMatch Tellus PRO automatically identifies the job control unit, which is located on the machine.

Flow-Check seed-flow monitoring
Kverneland Group offers an optional seed flow check system for pneumatic seed drills. This is an independent system which monitors the seed distribution tubes immediately recognising and reporting any blockages or errors. The display indicates the affected seed delivery tube, making it possible to localise and remove the problem quickly. The system is suitable for all common seed types and can be fitted retrospectively on all pneumatic seed drills.

iM FARMING

Smart efficient easy farming

IsoMatch GEOCONTROL

Lavet til smart, effektivt og nemt landbrug

IsoMatch GEOCONTROL er et avanceret software-program inden for IsoMatch Tellus og IsoMatch Tellus GO+, der hjælper dig med at styre alle ISOBUS kompatible Kverneland Group maskiner såsom sprøjter, spredere og såmaskiner! Kombineret med en GPS-modtager opfylder den fremtidens behov med hensyn til nemt, smart og effektivt landbrug!

More about IsoMatch GEOCONTROL >

IsoMatch-GEOCONTROL-Field

ISOBUS

Når der besluttes, hvilket udstyr der skal købes, er det ikke altid let at finde den optimale løsning på det brede marked, som der tilbydes i dag. Teknologien udvikler sig hurtigt, da vores traktorer og redskaber er mere og mere udstyret med højteknologisk elektronik. Vi forstår denne kompleksitet og er forpligtet til at give dig nemme landbrugsløsninger. derfor er disse omkostningseffektive ISOBUS Universal Terminals, IsoMatch Tellus PRO og IsoMatch Tellus GO+ lavet til dem der ønsker en nem og effektiv maskinstyring.

More about ISOBUS Universal Terminals >

IsoMatch Tellus PRO

Med sine avancerede hardware og softwarefunktioner leverer IsoMatch Tellus PRO den optimale præcisionslandbrugsløsning til et alt-i-et kontrolsystem i dit traktorførerhus.

IsoMatch Tellus PRO er centrum for tilslutning af alle ISOBUS maskiner og en platform til kørsel af  præcisionslandbrugsapplikationer. Det giver alt, hvad en landmand har brug for, for at få mest muligt ud af sine maskiner og afgrøder, samt med omkostningsbesparelser i gødning, kemikalier og frø ved automatisk sektionskontrol og variabel satskontrol. Med den unikke dobbeltskærms funktion giver det mulighed for at se og styre to maskiner og processer samtidigt. 

IsoMatch Tellus GO+

Arbejd nemt, vær i kontrol.

IsoMatch Tellus GO+ er specielt udviklet til at styre maskinen på en enkel måde. Landmanden har fuld kontrol over maskinen på præcis den måde, han ønsker. Maskinen kan nemt sættes op med de bløde taster via 7" touch skærm og optimal kontrol under kørslen skal du bruge de hårde taster og drejekontakten. det har aldrig været så nemt at styre redskabet.

Det kan være dit første skridt ind i præcisionslandbrug, aldrig har det været så let.
IsoMatch Tellus GO+ gør det nemt at styre enhver ISOBUS maskine fra dit førerhus. IsoMatch GEOCONTROL giver dig mulighed for at opnå hørere udbytte, lavere omkostninger og gøre dit arbejde meget lettere. Denne licensnøgle er opdelt i to dele, sektionskontrol og variabel ratekontrol, som er tilgængelig fra IsoMatch Shop. Nu kan du købe den specifikke funktionalitet, du har brug for.

More about IsoMatch Tellus GO+ >

IsoMatch InLine

With manual guidance you are perfectly on track.

The IsoMatch InLine is a light bar which allows easy manual guidance. It is the perfect assistant to get you as close as possible to your desired A-B line. Mounted in the line of sight, you can easily see the distance from the A-B line and to which direction you should steer for the ideal position. The display of the IsoMatch InLine also displays the status of the machine sections, which adds more comfort of use. The LEDs can be dimmed for night operation.

SMART   
Distance to A-B line with LED indication and a numeric display

EFFICIENT 
Manual guidance in combination with IsoMatch GEOCONTROL 

EASY           
Displays status of machine sections

IsoMatch Global 2

The essential accessory for IsoMatch GEOCONTROL.

The IsoMatch Global 2 is the GPS antenna, with DGPS accuracy, in the IsoMatch product range. It enables satellite navigation for site-specific section control, variable rate application, manual guidance and field registration.

SMART
Allows manual guidance, automatic section control and variable rate in combination with IsoMatch GEOCONTROL

EFFICIENT
DGPS accuracy without additional subscription fees

EASY
Easy to fit with mounting brackets included

IsoMatch MultiEye

IsoMatch MultiEye is an accessory for connecting multiple cameras to the IsoMatch Universal Terminal.

With the IsoMatch MultiEye you can connect multiple cameras to the IsoMatch Tellus or IsoMatch Tellus GO+ Terminal. You can easily switch between the cameras without the need for an additional screen in you tractor cabin. It gives you full control and overview of the entire machine operation during day and night, because of its night vision by integrated LED’s. This increases the safety when reversing the machine or manoeuvring around obstructions.

SMART
You can connect up to four IsoMatch Eye cameras and easily switch between the cameras with the remote control box which is standard included.

EFFICIENT
Full control and overview of entire machine operation from every side you want.

EASY
Night vision by integrated LED’s which increases the safety when reversing the machine or manoeuvring around obstructions.

IsoMatch Grip

The IsoMatch Grip is an ISOBUS auxiliary device developed for great operator comfort and efficient machine control. Its ergonomic shape and the complete freedom of assigning and controlling a total of 44 implement functions from one device are unique in the market today. From your fingertips you have endless possibilities to operate all machine functions as desired. And assignments are saved per machine making it even more applicable to your needs.

More about IsoMatch Grip >

IsoMatch_Grip_783x600

Spørg Kverneland