Kverneland CLC pro Classic

3-bar stubble cultivator for smaller tractors (from 90hp). Available in 3.0, 3.5m as rigid, 4.0m 4.5 and 5.0m as folding version.

CLC pro Classic - A „pro“ for smaller tractors
The CLC pro Classic is a 3-bar cultivator for smaller tractors (from 90hp). Based on the CLC pro the Classic variant is equipped with an easy and compact module for rear accessories. Available as rigid from 3 to 3.5m and 4.0m, 4.5m and 5.0m as folding version. The parallelogram frame carries two curved arms reducing the overhang of the machine. A section of levelling tines is directly connected to the roller frame. Lighter than discs, the tines ensure an excellent levelling result in all conditions. The working depth and aggressiveness of the levelling tines are infinitely adjustable.Therefore, the CLC pro Classic is 50cm shorter than the CLC pro.

Please see the DLG test report

The Advantages:

  • High Horse power capacity to cope with all conditions and tractor sizes from 90 to 350 hp
  • Universal Cultivator from  3.0 to 5.0 m, working 5 to 30cm deep
  • 3 bar frame for optimum mixing and blockage free operation
  • Unique leg design vibrating for intensive effect in the soil but low fuel consumption
  • Wide choice of shares, rear rollers and levelling equipment
  • Intensive mixing of the residues
  • Seedbed finish possible
  • The CLC pro Classic is 50cm shorten than the CLC pro, shifting the centre of gravity closer to the tractor
Model Working width (m) No. of tines Average tine spacing (mm) Min./max. HP
CLC pro 300  Classic 3.0 10 280 85 / 160
CLC pro 350  Classic 3.5 12 280 100 / 200
CLC pro 400F Classic 4.0 13 290 130 / 230
CLC pro 450F Classic 4.5 15 290 150 / 255
CLC pro 500F Classic 5.0 17 290 170 / 280

 
 
 
 

Highlights

CLC pro Classic - Strong Frame

  • The frame design and heavy-duty central beam offers in-field durability even under extreme working conditions.
  • The machine offers high underbeam clearance with 870mm to cope with incorporation of high volumes of crop residue.
  • The frames can absorb e.g. 240 hp with 3.00m and up to 350hp for the folding implements with 5.0m.
  • The material used can bear significant loads while staying reliable and light.
  • The weight carried by the tractor is thus reduced and helps saving fuel.

Tines and Shares

  • The unique and robust design of the tines incorporates a specially heat treated hollow “C” profile.
  • The heat treatment is of the same standards as the beams on the Kverneland ploughs.
  • For lighter conditions, Kverneland offer the "C" tine with shearbolt overload protection releasing from 2 tons.
  • The Kverneland "C" tine equipped with the "Auto-reset" leaf spring safety system is the perfect choice for hard and stony conditions.
  • The tine leg can withstand sideway movements of up to 14cm for the CLC pro, CLC pro Classic, CLC pro Cut and to 20cm for the CLC Evo. This means lower stress to the tine holder and frame structure.
  • The "C"-tine system is maintenance-free.

Tines can be combined with a variety of share systems allowing working depths between 5cm and 30cm

  • The "C"-tine: with the standard reversible plough point made of high quality steel for maximum service life. This allows to work at great depths even in stony soil - eliminating plough pans and in this way encouraging natural drainage. 
  • For stubble cultivation the "C" tine can be equipped with 30cm wing shares.
  • New Quantum share 345mm - always in combination with Knock-on® or Tiger carbide point 80mm. It has been designed for use especially in hard soil. The 80mm point combined with the 345mm wing share ensures perfect penetration and complete flat cutting for a homogeneous weed regrowth.
  • Two types of carbide points – 80mm and 150mm Tiger point. The special design ensures progressive and high penetration and requires low pulling force. The special shape of the carbide plate resist against aggressive stony conditions. All points available with Knock-on® deflectors too.
  • Click here for further details on the Knock-on® system. 

CLC pro Classic - Leaf Spring/Vibromat

  • For lighter conditions Kverneland offer the CLC tine with shearbolt overload protection.
  • This version of the CLC tine offers the same high quality as that of the „Auto-reset“ tine, and is releasing from 2 tons.
  • The Kverneland CLC tine equipped with the “Auto-reset“ leaf spring safety system is the perfect choice for hard and stony conditions.
  • 2 types of leaf springs are available on CLC pro Classic: 450 kg or 640 kg release force depending on soil conditions
  • The well renowned Kverneland leaf spring protects the tines against overload. The tine pressure decreases with the release height to protect the frame against stress.
  • All pivot points of the CLC tines are manufactured with wear resistant bushes and bolts of the renowned Kverneland quality.
  • Therefore the CLC tine system is maintenance-free

CLC pro Classic - Rear Accessories

There is a full range of rear rollers available:

Levelling tines

  • Good levelling capacity
  • Good following of the ground contour
  • Adjustable by turnbuckle

Cage roller ø 550mm

  • 10 bars for a good loading capacity and operation in wet conditions
  • Effective crumbling action

Double cage roller ø 400mm (tube/flat) - 160 kg/m

  • Good crumbling
  • Precise depth control

Actipack ø 560mm - 220 kg/m

  • The Kverneland Actipack roller displays its superb working qualities especially on medium to heavy soils and also in wet, stony and sticky conditions thanks to the independent skids and knives
  • The cutting discs break the larger clods whilst the adjustable knives cut the remaining clods resulting in optimal clod breakdown and fine seedbed preparation

Actiring ø 540mm - 160 kg/m:

  • The Actiring roller is a lighter variant of the Actipack, using the same frame structure and knife system
  • The discs have been replaced by a “V” profile ring, this is saving 60kg/m, which is of critical importance for reducing lifting requirements for mounted equipment
  • Actiring is not recommedned in stony conditions

Actiflex ø 580mm - 160 kg/m

  • The Actiflex roller has been made to create an intensive mixing with all types of conditions, even stony ones
  • The rings are made with spring steel to have a high resistance against stress at high speed
  • Actiflex rings are separated by skids to prevent any accumulation inside the roller
  • This roller is the ideal tool to create a nice seedbed and enhance the weeds' regrowth after harvesting

Spørg Kverneland