Kverneland TLG

Præcisionssåbedsharve

TLG er en robust præcisionsharve, specielt designet til at lave det perfekte såbed til sukkerroer, kartofler og grøntsager.

TLG består af 4 arbejdszoner: Forrest en robust lamelslæbeplanke, dernæst en effektiv rørpakkevalse, til dybdekontrol 4 rækker S-tænder og til sidst en fingerefterharve eller en enkelt eller dobbelt tromle. Denne kombination er ideel, når der skal forberedes et stabilt, planeret og fint såbed. Det fleksible ”bolte-på” princip gør, at man kan ændre rørpakkevalsens position fra at være i front til at være imellem tandrækkerne. TLG fås i arbejdsbredder på 4.5, 5.0 og 6,0 meter.

Fordele:

  • Såbedstilberedning fra 4 til 6 meter
  • Velegnet til såbedstilberedning til majs, sukkerroer, kartofler og grøntsager
  • Præcis dybdekontrol ved hjælp af rørvalse
  • Utallige indstillingsmuligheder for nem og hurtig indstilling
  • Justerbar arbejdsvinkel på tænderne fra 50 til 90 grader
  • Rammen bygget op i 3 sektioner for perfekt jordfølgeevne
Model arbejdsbredde (m) Vægt (kg) Min. trækkraftbehov (hk)
TLG 400 4.0 1880 65/90
TLG 500 5.0 2345 85/120
TLG 600 6.0 2590 100/140
KV_tlg_0007.jpg
Video
Animation
Kverneland TLG
Kverneland TLG
Kverneland TLG
Kverneland TLG
Kverneland TLG
Kverneland TLG
Kverneland TLG
Kverneland TLG


Zone 1 - Levelling

For the first working zone "levelling" there are two different options available:

  • A straight levelling board adjustable by pin.
  • Clod Board: robust and very effective for the breaking of clods. It is manually adjusted or by hydraulics from the tractor seat.

Both the levelling board and the Clod Board are designed in three sections to better follow the ground contours.

KV_tlg_0002.jpg

Zone 2 - Depth Control

  • The cage roller is fitted in the front, directly following the levelling equipment, to ensure depth control. Due to this position in the front, the risk of soil building up on the roller is reduced.
  • The flexible "bolt-on" principle allows to move the cage roller from the front to in between the tine sections if required.
KV_tlg_0009.jpg

Zone 3 - Cultivating/Crushing

  • Four rows of effective tines giving optimum performance.
  • The first two rows of 45 x 10mm tines, have 500mm interrow clearance to allow optimum soil flow, even under heavy and cloddy conditions.
  •  The second two rows of 32 x 10mm tines with 250mm interrow clearance improve clod breaking and levelling.
  •  The tines are adjusted by crank. The angles of the front and rear tines can be adjusted individually per row.
KV_tlg_0008.jpg

Zone 4 - Crumbling/Consolidation

  • At the rear of the machine a finger harrow, a single or double roller is finishing the work.
  • The finger harrow can be rigid or spring-loaded.
  • Depending on the requirements, the Kverneland TLG can be equipped with a single or double roller or with a combination of a standard roller and a crosskill.
  • All giving excellent packing and a nicely finished seedbed depending on soil type
KV_tlg_0001.jpg