Kverneland Exacta TLX GEOSPREAD

High speed spreading

The Kverneland Exacta TLX GEOSPREAD has almost exactly the same specifications as the Exacta TL GEOSPREAD, but comes with a newly designed CentreFlow system with 8 capacity vanes on each disc for a perfect overlap, no matter how fast you are driving. With 2 metres sections, 4 load cells and a reference sensor, the Kverneland Exacta TLX GEOSPREAD can do high speed spreading under all circumstances. This Exacta TLX GEOSPREAD spreader is ISOBUS compatible and AEF certified. You can operate the spreader in combination with the IsoMatch Tellus, IsoMatch Tellus GO or any other ISOBUS compatible tractor terminal.

The advantages

  • High speed CentreFlow spreading system
  • Fully automatic weighing system with unique reference sensor
  • Unique GEOSPREAD system with two electric actuators
  • ISOBUS 11783 compatible for easy plug and play
  • Possible in combination with IsoMatch GEOCONTROL

Technical Specifications

Exacta TLX GEOSPREAD  TLX GEOSPREAD 1875 TLX GEOSPREAD 2550 TLX GEOSPREAD 3225 TLX GEOSPREAD 3900
Hopper capacity (l) 1875 2550 3225 3900
Filling height (cm) 123 142 161 180
Width (cm) 290 290 290 290
Filling width (cm) 284 284 284 284
Empty weight (kg) 690 720 750 780
Spreading width (m) 24-40 24-40 24-40 24-40
Output (kg/min) 10-540 10-540 10-540 10-540
KV Exacta TLX GEOSPREAD 002
Video
Animation
Kverneland Exacta TLX GEOSPREAD
Kverneland Exacta TLX GEOSPREAD
Kverneland Exacta TLX GEOSPREAD
Kverneland Exacta TLX GEOSPREAD
Kverneland Exacta TLX GEOSPREAD
Kverneland Exacta TLX GEOSPREAD
Kverneland Exacta TLX GEOSPREAD
Kverneland Exacta TLX GEOSPREAD


GEOSPREAD System

When running IsoMatch GEOCONTROL in addition to GEOSPREAD you can set the Exacta CL and TL GEOSPREAD more accurately. The working width will be automatically adjusted to suit the overlap and coverage using a GPS positioning system. For example, when driving in a wedge or irregular shaped field, GEOSPREAD will start to decrease the working width step by step. GEOSPREAD is using the section control function of the IsoMatch GEOCONTROL software which is in the IsoMatch Tellus or IsoMatch Tellus GO terminal. The spreader working width is divided into a minimum of 2 metre sections (max. 24 sections on TL GEOSPREAD and max. 14 sections on CL GEOSPREAD). Not only the spreading width is adjusted, the application rate (kg/min) is also adjusted automatically to match the revised spreading width. This unique combination of working width and application rate adjustment makes the GEOSPREAD system extremely accurate, with minimum influence on the spread pattern coefficient of variation.

The Advantages:

  • Quick and accurate spreading, due to the actuators being directly connected to the discharge point. No linkages.
  • Stable disc RPM in combination with discharge point adjustment maintains the spreading pattern (coefficient of variation)
  • Easy operation; no need to step off the tractor to adjust the working width
  • 100% ISOBUS compatible for easy operation 
  • Automatic start/stop with GPS on headlands possible
KV Exacta TL GEOSPREAD 003
GEOSPREAD System
GEOSPREAD System
GEOSPREAD System
GEOSPREAD System
GEOSPREAD System
GEOSPREAD System
Accurate spreading in irregular shaped fields
Accurate spreading in irregular shaped fields
Accurate spreading in irregular shaped fields

High Speed CentreFlow system

With the High speed CentreFlow system, fertiliser is gently brought up to speed in the dosing cup, before it is released on the disc. This system is unique compared to most other spreading systems that have the fertiliser falling on the disc. Therefore the High speed CentreFlow system has some important advantages:

  • No impact, so no fragmentation. Spreading pattern is not affected by damaged fertiliser.
  • 8 vanes per disc instead of 2. With 8 vanes fertiliser is released on a high frequency for a very constant flow and even spreading pattern, which is especially important when driving higher speeds and spreading larger quantities. 
  • Accurate spreading in hilly conditions. An inclination of the spreader does not affect the release point of the fertiliser on the disc and from the vane.
KV Exacta TLX GEOSPREAD 006
8 vanes per disc
8 vanes per disc
8 vanes per disc
2 vanes per disc
2 vanes per disc
2 vanes per disc
CentreFlow principle
CentreFlow principle
CentreFlow principle

Weighing System

  • Continuous dynamic "online - calibration" with high frequency communication signal.
  • Kvernelands unique reference sensor technology: all negative influences are automatically corrected and eliminated, ensuring utmost spreading accuracy even on hill sides. The Kverneland reference sensor gives you absolute accuracy, because every kilo counts!
  • Load cells in combination with the unique reference sensor:
    - Auto calibrating and continuous weighing system
    - Automatic correction on slopes
    - Automatic correction of shocks, even on rough terrain
    - Automatic speed related dosing system
    - No calibration test needed
  • Highest accuracy in all conditions: even spreading quality guaranteed! Save costs and increase quality! 
KV_exacta_0053.jpg
Weighing system Exacta TL
Weighing system Exacta TL
Weighing system Exacta TL
Weigh cell
Weigh cell
Weigh cell
Actuators to open and close
Actuators to open and close
Actuators to open and close
Reference sensor CL EW
Reference sensor CL EW
Reference sensor CL EW

EasySet: Easy Setting and Adjustment

  • The compact EasySet 'dashboard' gives you considerably simplified accurate setting and adjustment of applicaton rates. Two hydraulically operated metering plates, each with three discharge openings ensure an equal fertiliser flow from the hopper to the spreading discs.
  • The development department of Kvernelands spreader R&D team has its own spreader competence centre in order to allow continuous testing throughout the year. All test are carried out according to the strictest international standards and quality requirements.
  • The key to accurate spreading is matching fertiliser quality and litre weight with the spreading charts as close as possible. The Kverneland Exacta checklist helps you to ensure consistent accuracy in all field conditions
    1. Select fertiliser type
    2. Determine granule size and distribution
    3. Determine litre weight
KV_exacta_210
Granule size box
Granule size box
Granule size box
Spreader Competence Centre
Spreader Competence Centre
Spreader Competence Centre
Access to the spreading charts via internet or mobile!
Access to the spreading charts via internet or mobile!
Access to the spreading charts via internet or mobile!
Download now the Spreading Charts App!
Download now the Spreading Charts App!
Download now the Spreading Charts App!

Border Spreading

  • Kverneland offers the ExactLine system or manual/hydraulic border spreading plate for border spreading. The ExactLine can be accurately set for all types of fertiliser and for all working widths. Operation is easy, no need to leave the tractor seat. For the HL, TL and TLX models the ExactLine can even be fitted on the left and right hand side of the spreader.
  • With one-side boundary spreading the tractor is driven approximately 2 metres from the field border.
  • With boundary track spreading the tractor is driving in the first tramline and is spreading to the border. The distance to the border is the half of the working width.
  • The Border Spreading Indicator (BSI), indicates which border spreading device is active.
KV_exacta_206
Border spreading using the ExactLine system
Border spreading using the ExactLine system
Border spreading using the ExactLine system
Hydraulic border spreading plate (not for EL)
Hydraulic border spreading plate (not for EL)
Hydraulic border spreading plate (not for EL)
Boundary track spreading
Boundary track spreading
Boundary track spreading
One side boundary spreading
One side boundary spreading
One side boundary spreading

AutosetApp

With the AutosetApp you have always the most up to date settings for your weighing spreader available. The AutosetApp is an App (software application) available on the IsoMatch Tellus or IsoMatch Tellus GO terminal. The AutosetApp is standard integrated into the IsoMatch Tellus GEOCONTROL software. This App connects the terminal directly with the GEOSPREAD weighing spreader and will automatically adjust the spreader according to the settings entered into the App. The AutosetApp will also work in combination with the CL-EW and TL, with the exception being for those spreaders the discharge point (letter setting) still needs to be adjusted manually on the spreader itself.

The Kverneland fertiliser spreader database with the most up to date spreading charts is always available online. The AutosetApp can connect to the fertiliser spreading database in two different ways. You can connect it to the online database via the IsoMatch Wireless WIFI USB adapter or download the most actual database from the website www.kvernelandspreadingcharts.com on an USB stick and upload the database directly into the IsoMatch Tellus or IsoMatch Tellus GO terminal.

KV AutosetApp 006
Download actual database
Download actual database
Download actual database
Enter working width, application rate, speed
Enter working width, application rate, speed
Enter working width, application rate, speed
Select the fertiliser
Select the fertiliser
Select the fertiliser
Forward the settings entered to the spreader
Forward the settings entered to the spreader
Forward the settings entered to the spreader

Standard and Optional Equipment

  • The Exacta HL/TL(X) spreaders are also available mounted on a trailer frame.
  • Central Hydraulic Drive as option available for the HL/TL(GEOSPREAD).
  • Easy to assemble aluminium hopper extensions are available to increase hopper capacity.
  • An easy to fold in and out hopper cover is as option availble. Simple to fit!
  • Left/right shut off valve for spreading at half working widths is optional available.
  • To ensure a consistent flow when spreading low quantities, the CentreFlow system is equipped with a fine application kit. Ideal for spreading low quantities, seeds and slug pellets.
  • Delta shaped heavy duty grids are standard equipment of the Exacta HL/TL(X) spreader.
  • Centre gear box with 2 input shafts for high and low disc speed settings is standard equipment of the HL/TL(X) spreader.
  • Hopper emptying kit is optional available to easy get the last fertiliser out of your hopper.
  • Easy calibration is done with the optional calibration container.
  • Long life time LED lighting set, is optional for the EL, CL and CL-EW. For the HL, TL and TL(X) GEOSPREAD spreader is this standard equipment.
  • The mud guards (option) protect the spreading disc against mud, water etc.
KV_exacta_100
Hydraulic Drive
Hydraulic Drive
Hydraulic Drive
Long lift time LED lighting set
Long lift time LED lighting set
Long lift time LED lighting set
Hopper emptying kit
Hopper emptying kit
Hopper emptying kit
Mud guards (option for HL/TL/TL GEOspread)
Mud guards (option for HL/TL/TL GEOspread)
Mud guards (option for HL/TL/TL GEOspread)