Kverneland Exacta CL GEOSPREAD

GPS controlled, intelligent spreading (into a minimum of 2 metre sections) with the Exacta CL GEOSPREAD.

Weighing Spreader for the Medium Size Market Segment

The Kverneland Exacta CL GEOSPREAD is the ideal spreader for arable farmers and professional dairy farmers. The GEOSPREAD system does section control with sections of only 2 metres. With a maximum of 14 sections and the possibility to switch sections over the middle, unnecessary overlap is set to an absolute minimum. The 4 load cells and reference sensor on the Kverneland Exacta CL GEOSPREAD spreader are important features as with section control accurate weighing is essential. The total benefit of GEOSPREAD combined with speed related spreading and GEOPOINT headland management can be up to 15%. This can be achieved by saving fertiliser and better yields, because of unnecessary overlap. This Kverneland Exacta CL GEOSPREAD spreader is ISOBUS compatible and AEF certified. You can operate the spreader in combination with the IsoMatch Tellus, IsoMatch Tellus GO or any other ISOBUS compatible tractor terminal.

The Advantages:

  • CentreFlow spreading system
  • Fully automatic weighing system with unique reference sensor
  • Unique GEOSPREAD system with two electric actuators
  • ISOBUS 11783 compatible for easy plug and play
  • Possible in combination with IsoMatch GEOCONTROL

Technical Specifications

Exacta CL GEOSPREAD 1100 1550 2000 2450
Hopper capacity (l) 1100 1550 2000 2450
Filling height (cm) 108 127 146 165
Width (cm) 220 220 220 220
Filling width (cm) 214 214 214 214
Empty weight (kg) 450 475 495 520
Spread width (m) 10 - 24 (27/30)* 10 - 24 (27/30)* 10 - 24 (27/30)* 10 - 24 (27/30)*
Output (kg/min) 10 - 320 10 - 320 10 - 320 10 - 320

 * Depending on fertiliser type and type of vanes.

Highlights

GEOSPREAD System

When running IsoMatch GEOCONTROL in addition to GEOSPREAD you can set the Exacta CL and TL GEOSPREAD more accurately. The working width will be automatically adjusted to suit the overlap and coverage using a GPS positioning system. For example, when driving in a wedge or irregular shaped field, GEOSPREAD will start to decrease the working width step by step. GEOSPREAD is using the section control function of the IsoMatch GEOCONTROL software which is in the IsoMatch Tellus or IsoMatch Tellus GO terminal. The spreader working width is divided into a minimum of 2 metre sections (max. 24 sections on TL GEOSPREAD and max. 14 sections on CL GEOSPREAD). Not only the spreading width is adjusted, the application rate (kg/min) is also adjusted automatically to match the revised spreading width. This unique combination of working width and application rate adjustment makes the GEOSPREAD system extremely accurate, with minimum influence on the spread pattern coefficient of variation.

The Advantages:

  • Quick and accurate spreading, due to the actuators being directly connected to the discharge point. No linkages.
  • Stable disc RPM in combination with discharge point adjustment maintains the spreading pattern (coefficient of variation)
  • Easy operation; no need to step off the tractor to adjust the working width
  • 100% ISOBUS compatible for easy operation 
  • Automatic start/stop with GPS on headlands possible

CentreFlow Spreading System

  • No impact, no fragmentation, no dust: Central release point, smooth acceleration and centrifugal force accelerates fertiliser up to disc speed before it reaches the vane.
  • Accurate spreading pattern: A double overlap spreading pattern gives unrivalled accuracy. The 8 vanes per discs are ensuring a continous flow of fertiliser to the field. This is important for high capacity spreading and forward speed.
  • Minimal wind influence, maximum tolerance: Flat discs and a horizontal flow of fertiliser give a symmetrical spreading pattern.
  • Consistent spreading pattern: Eight vanes per disc, eight sectors per revolution give an equal distribution. Double overlap spreading pattern.
  • Guaranteed accuracy on slopes: guaranteed accuracy on slopes. The fertiliser always contacts the vanes at the same point, also on slopes and travels the complete length of the vane.

Weighing System

  • Continuous dynamic "online - calibration" with high frequency communication signal.
  • Kvernelands unique reference sensor technology: all negative influences are automatically corrected and eliminated, ensuring utmost spreading accuracy even on hill sides. The Kverneland reference sensor gives you absolute accuracy, because every kilo counts!
  • Load cells in combination with the unique reference sensor:
    - Auto calibrating and continuous weighing system
    - Automatic correction on slopes
    - Automatic correction of shocks, even on rough terrain
    - Automatic speed related dosing system
    - No calibration test needed
  • Highest accuracy in all conditions: even spreading quality guaranteed! Save costs and increase quality! 

EasySet: Easy Setting and Adjustment

  • The compact EasySet 'dashboard' gives you considerably simplified accurate setting and adjustment of applicaton rates. Two hydraulically operated metering plates, each with three discharge openings ensure an equal fertiliser flow from the hopper to the spreading discs.
  • The development department of Kvernelands spreader R&D team has its own spreader competence centre in order to allow continuous testing throughout the year. All test are carried out according to the strictest international standards and quality requirements.
  • The key to accurate spreading is matching fertiliser quality and litre weight with the spreading charts as close as possible. The Kverneland Exacta checklist helps you to ensure consistent accuracy in all field conditions
    1. Select fertiliser type
    2. Determine granule size and distribution
    3. Determine litre weight

Border Spreading

  • Kverneland offers the ExactLine system or manual/hydraulic border spreading plate for border spreading. The ExactLine can be accurately set for all types of fertiliser and for all working widths. Operation is easy, no need to leave the tractor seat. For the HL, TL and TLX models the ExactLine can even be fitted on the left and right hand side of the spreader.
  • With one-side boundary spreading the tractor is driven approximately 2 metres from the field border.
  • With boundary track spreading the tractor is driving in the first tramline and is spreading to the border. The distance to the border is the half of the working width.
  • The Border Spreading Indicator (BSI), indicates which border spreading device is active.

AutosetApp

With the AutosetApp you have always the most up to date settings for your weighing spreader available. The AutosetApp is an App (software application) available on the IsoMatch Tellus or IsoMatch Tellus GO terminal. The AutosetApp is standard integrated into the IsoMatch Tellus GEOCONTROL software. This App connects the terminal directly with the GEOSPREAD weighing spreader and will automatically adjust the spreader according to the settings entered into the App. The AutosetApp will also work in combination with the CL-EW and TL, with the exception being for those spreaders the discharge point (letter setting) still needs to be adjusted manually on the spreader itself.

The Kverneland fertiliser spreader database with the most up to date spreading charts is always available online. The AutosetApp can connect to the fertiliser spreading database in two different ways. You can connect it to the online database via the IsoMatch Wireless WIFI USB adapter or download the most actual database from the website www.kvernelandspreadingcharts.com on an USB stick and upload the database directly into the IsoMatch Tellus or IsoMatch Tellus GO terminal.

Standard and Optional Equipment

  • Easy to assemble aluminium hopper extensions are available to increase hopper capacity.
  • An easy to fold in and out hopper cover is as option availble. Simple to fit!
  • Left/right shut off valve for spreading at half working widths is optional available.
  • To ensure a consistent flow when spreading low quantities, the CentreFlow system is equipped with a fine application kit. Ideal for spreading low quantities, seeds and slug pellets.
  • Delta shaped heavy duty grids are standard equipment of the Exacta CL spreader.
  • A hopper emptying kit is available for easy emptying of the last fertiliser granules out of the hopper.
  • A tramline cylinder, manual or hydraulic border spreading plate or ExactLine border spreading device can be ordered for easy border spreading.
  • Long life LED lights are optional available.

Spørg Kverneland