Kverneland 6350 FlexiWrap

Integrated Baler Wrapper Combination

The new Kverneland 6350 FlexiWrap combines high density bales, fast and accurate bale transfer with a high speed twin satellite wrapper. It is the ideal solution for a one-man operation. It incorporate the Kverneland 6350 with the twin satellite wrapper, all firmly mounted onto a strong and durable chassis with tandem axles

The Advantages:

  • Integrated solution for baling and wrapping in one go.
  • Fixed chamber full roller bale concept with a bale diameter of 1.25x1.20m.
  • Wrapping table is transferred to the tailgate of the baler, so the bale is dropped directly onto the table.
  • High speed wrapping with two prestretchers – wrapping process will always finish before the next bale is ready.
  • Low table height for gentle unloading ofbales. Optional bale on end kit available.
  • The extra film rolls are lowered hydraulically for easy change

Technical Specifications:

  6350 FlexiWrap SC-14 6350 FlexiWrap SC-25
Bale Size 1.25x1.20m 1.25x1.20m
Bale Chamber 17 rollers 17 rollers
Pick-Up (m) 2.20 2.20
Cutting Device SuperCut 14 SupeCut 25
KV_6350FW_008
Video
Animation
Kverneland 6350 FlexiWrap
Kverneland 6350 FlexiWrap
Kverneland 6350 FlexiWrap
Kverneland 6350 FlexiWrap


Superior Intake Performance

SuperCut-25

  • The SuperCut-25 pre-chopping system offers the ultimate solution for short chop baling with a chop length of 40mm. The short and precise chop provides dense and airtight bales for the best possible silage quality.
  • The operator can choose to engage 25, 13, 12, 6 or 0 knives, giving maximum flexibility of operation.
  • The SuperCut- 25 knives are fitted with dual action protection against foreign objects. Each knife is individually spring protected and can move in two directions.

SuperCut-14

  • The SuperCut-14 knife chopping system provides a fast and efficient flow into the baler. With a chopping length of 70 mm it is the ideal solution for producing tight bales with superb silage quality.
  • Each individual knife is spring protected against foreign obstacles. The knife will immediately return to working position once the obstacle has passed.

SuperFeed Rotor Intake for Ultimate Capacity

Truly impressive intake capacity can be achieved with the SuperFeed rotor intake system - handling all crop types with ease, whatever the conditions.

Single or Dual Fork Feeder

  • The fork feeder versions are fitted with a cost efficient fork feeder intake system. This system provides direct feed into the bale chamber, and the wide opening allows almost unrestricted intake capacity for fast and efficient bale start.
  • In addition the fork feeder gives less vibration and reduced power consumption.
  • Dual fork feeder with double feed tines ensures even higher capacity, while still safeguarding fragile crop types.
SuperCut-25 knife
SuperCut-14 rotor.
SuperCut-14 rotor.
SuperCut-14 rotor.
The SuperFeed rotor gives positive intake in all conditions
The SuperFeed rotor gives positive intake in all conditions
The SuperFeed rotor gives positive intake in all conditions
The ForkFeeder is provided with a crop press above the pick-up.
The ForkFeeder is provided with a crop press above the pick-up.
The ForkFeeder is provided with a crop press above the pick-up.

Parallelogram DropFloor system for easy unblocking

  • Kverneland Drop Floor enables the operator to clear blockages easily from the tractor cab without any crop loss.
  • Drop the floor to free the rotor of blockage, engage the PTO to feed the blockage through and close the floor to continue baling
DropFloor

PowerBind Twine and Net wrapping Systems

Easy Loading

  • The very low loading height and the very easy threading of the system mean minimum downtime and maximum time baling. Storage for three rolls of net means you don’t have to worry about running out of net when the pressure is really on during long working days.

Twine Tying

  • Automatic twine tying with the fast acting double tube system means simultaneous binding of both edges of the bale, keeping binding time to a minimum. Over crossing of twines in the centre of the bale provides no loose ends at the end of the binding cycle.
  • The system is fully user programmable to make sure you make the best looking bales in all crop conditions.

New PowerBind Net Wrap

  • The New Fix chamber baler is equipped with the patented new PowerBind net wrap system. PowerBind provides positive and reliable injection of net in all crop conditions, while also eliminating potentially troublesome feed rollers.Additionally the PowerBind provides one of the fastest net wrap actions available. This means minimum downtime and maximum time baling
  • Net is fed right to the outside of the bale, with a specially widened entry channel, which also allows extra wide net types to be utilized if required.
  • The simple net wrap system allows the net to extend past the edge of the bale. The 1.30m net is wider than the baling chamber, so that the net can be pulled over the edge of the 1.20m bale. The result is consistent perfectly shaped and tightly secured bales
PowerBind Net Wrap
The binding and net roll are positioned in a visible area.
The binding and net roll are positioned in a visible area.
The binding and net roll are positioned in a visible area.
Twin tube fast operating binding system.
Twin tube fast operating binding system.
Twin tube fast operating binding system.
Convinient easy access storage for net and twine.
Convinient easy access storage for net and twine.
Convinient easy access storage for net and twine.
The 1.30m net is wider than the baling chamber, pulling it over the edges.
The 1.30m net is wider than the baling chamber, pulling it over the edges.
The 1.30m net is wider than the baling chamber, pulling it over the edges.

The Full Roller PowerMax Chamber

  • The Kverneland 6350 is a specialist wet silage baler and the ideal solution for producing well-shaped and dense bales.
  • The 17 heavy duty rollers with inner reinforcing discs are designed to work with the heaviest bales.
  • The sturdy drive train of the compression rollers is conceived to withstand the most severe loads. Rollers are mounted on heavy-duty bearings.
  • The small diameter rollers provide maximum density keeping horsepower requirement to a minimum.
  • The bale pressure can be selected from the cab.
  • The ribbed profile of the rollers and the use of 17 rollers ensure reliable bale rotation whatever the crop conditions.
PowerMax bale chamber
The Kverneland 6335 is fitted with 17 heavy duty rollers.
The Kverneland 6335 is fitted with 17 heavy duty rollers.
The Kverneland 6335 is fitted with 17 heavy duty rollers.
Each roller is carried on heavy duty bearings.
Each roller is carried on heavy duty bearings.
Each roller is carried on heavy duty bearings.
The roller bearings are easily greased from the central grease bank.
The roller bearings are easily greased from the central grease bank.
The roller bearings are easily greased from the central grease bank.

FlexiWrap Bale Transfer

  • Once the net is applied to the bale the wrapping table is transferred to the tailgate of the baler unit, ready to receive the finished bale.
  • When the tailgate opens the bale is dropped directly onto the wrapping table, with no interfering steps in-between that needs to guide the bale onto the wrapping table.
  • This provides a very safe bale transfer with no risk of the bale rolling off the wrapping table, even when working in very hilly conditions.
  • When the bale is onto the wrapping table it is transferred quickly to the satellite wrapper, and wrapping starts instantly.
KV_6350FW_004
FlexiWrap Bale Transfer
FlexiWrap Bale Transfer
FlexiWrap Bale Transfer
FlexiWrap Bale Transfer
FlexiWrap Bale Transfer
FlexiWrap Bale Transfer
FlexiWrap Bale Transfer
FlexiWrap Bale Transfer

FlexiWrap Wrapping Table

  • The wrapping table with 4 endless belts and rollers carries and rotates the bale evenly during wrapping with no risk of film damage.
  • The twin pre-stretchers ensure high speed wrapping, so the wrapping process will finish on time before the new bale is ready.
  • The pre-stretchers are positioned close to the bale, to limit the amount of air trapped under the film during wrapping.
  • Once the bale is wrapped, it can be unloading automatically or manually during formation of the next bale. The manual option gives the driver the possibility to drop the bale where most suitable, for instance so bale are all dropped in line for each pick-up.
  • The low mounted wrapping table ensures gentle unloading of the bales. In addition the Kverneland FlexiWrap can be fitted with a bale on end kit. The bale is tipped off gently on the end side, where the highest number of film layers is applied.
KV 6350FW1
FlexiWrap Wrapping Table
FlexiWrap Wrapping Table
Film rolls are lowered hydraulically
Film rolls are lowered hydraulically
Film rolls are lowered hydraulically
FlexiWrap Wrapping Table
FlexiWrap Wrapping Table

Strong Chassis Design

  • The FlexiWrap baler wrapper combination is firmly mounted onto a strong and durable chassis.
  • Load and weight are evenly distributed for maximum stability, for instance thanks to the low position of the wrapping table.
  • The tandem axle with 500/50-17 tyres provides very good stability when operating in the field or running on the road.
KV_6350FW_001
Strong Chassis Design
Strong Chassis Design
Strong Chassis Design
Strong Chassis Design